Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
UCC2837NG4
Lihat Butiran Helaian data

UCC2837NG4

Overview

Category: Integrated Circuit (IC)

Use: Power Management

Characteristics: - High-performance power factor correction (PFC) controller - Designed for use in AC/DC power supplies - Provides high efficiency and low total harmonic distortion (THD) - Enables compliance with international power quality standards

Package: DIP-16 (Dual In-Line Package)

Essence: The UCC2837NG4 is a highly efficient PFC controller that ensures optimal power factor correction in AC/DC power supplies. It offers improved power quality and helps meet international standards.

Packaging/Quantity: The UCC2837NG4 is available in a DIP-16 package, which contains one unit of the IC.

Specifications

  • Input Voltage Range: 85V to 265V AC
  • Output Voltage Range: Adjustable
  • Maximum Output Power: 300W
  • Operating Temperature Range: -40°C to 125°C
  • Supply Voltage: 10V to 20V
  • Quiescent Current: 2mA

Pin Configuration

The UCC2837NG4 has 16 pins arranged as follows:

  1. VSENSE: Voltage sense input
  2. ISENSE: Current sense input
  3. COMP: Compensation pin for loop stability
  4. RT/CT: Timing resistor/capacitor connection
  5. CS: Current sense amplifier output
  6. GND: Ground reference
  7. VREF: Reference voltage output
  8. VCC: Supply voltage input
  9. FB: Feedback pin for output regulation
  10. UVLO: Undervoltage lockout input
  11. SYNC: Synchronization input
  12. SS/TRISET: Soft-start/tri-state control
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. VSENSE: Voltage sense input

Functional Features

  • High power factor correction (PFC) efficiency
  • Low total harmonic distortion (THD)
  • Wide input voltage range for universal AC mains compatibility
  • Overvoltage and undervoltage protection
  • Soft-start functionality for smooth power-up
  • Synchronization capability for multi-phase operation
  • Error amplifier with adjustable compensation for loop stability

Advantages and Disadvantages

Advantages: - High efficiency PFC operation - Compliance with international power quality standards - Wide input voltage range for versatile applications - Protection against overvoltage and undervoltage conditions - Flexible synchronization capability for multi-phase systems

Disadvantages: - Limited output power of 300W - Requires external timing resistor and capacitor for operation - DIP-16 package may not be suitable for space-constrained designs

Working Principles

The UCC2837NG4 operates by controlling the power factor correction in AC/DC power supplies. It utilizes a feedback mechanism to regulate the output voltage and maintain high efficiency. The IC continuously monitors the input voltage, current, and output voltage to ensure optimal power transfer and minimize harmonic distortion.

Detailed Application Field Plans

The UCC2837NG4 is commonly used in various applications, including: - Switched-mode power supplies (SMPS) - LED lighting systems - Industrial equipment - Telecommunications infrastructure - Renewable energy systems

Detailed and Complete Alternative Models

  1. UCC28070: High-performance PFC controller with integrated boost switch
  2. UCC28060: Advanced PFC controller with enhanced features and protection mechanisms
  3. UCC28180: Digital PFC controller with adaptive control algorithms and communication interface
  4. UCC28051: Cost-effective PFC controller with simplified design and low component count

These alternative models offer similar functionality and can be considered based on specific application requirements.

Word count: 399 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi UCC2837NG4 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of UCC2837NG4 in technical solutions:

  1. Q: What is UCC2837NG4? A: UCC2837NG4 is a high-performance, dual-phase synchronous buck controller IC designed for power supply applications.

  2. Q: What are the key features of UCC2837NG4? A: Some key features include wide input voltage range, adjustable switching frequency, integrated MOSFET drivers, and comprehensive protection features.

  3. Q: What is the typical application of UCC2837NG4? A: UCC2837NG4 is commonly used in applications such as server power supplies, telecom equipment, industrial power systems, and high-end consumer electronics.

  4. Q: How does UCC2837NG4 achieve high efficiency? A: UCC2837NG4 achieves high efficiency through its advanced control algorithms, adaptive dead-time optimization, and low-resistance MOSFET drivers.

  5. Q: Can UCC2837NG4 operate with a wide input voltage range? A: Yes, UCC2837NG4 can operate with an input voltage range typically from 4.5V to 28V, making it suitable for various power supply designs.

  6. Q: Does UCC2837NG4 support synchronous rectification? A: Yes, UCC2837NG4 supports synchronous rectification, which helps improve overall efficiency by reducing power losses.

  7. Q: What is the maximum switching frequency of UCC2837NG4? A: The maximum switching frequency of UCC2837NG4 is typically around 2 MHz, allowing for fast response and compact designs.

  8. Q: What protection features does UCC2837NG4 offer? A: UCC2837NG4 offers protection features such as overvoltage protection, undervoltage lockout, overcurrent protection, and thermal shutdown.

  9. Q: Can UCC2837NG4 be used in parallel for higher power applications? A: Yes, UCC2837NG4 can be easily configured in a master-slave configuration to achieve higher power levels by paralleling multiple devices.

  10. Q: Is UCC2837NG4 easy to use in circuit designs? A: Yes, UCC2837NG4 is designed with ease of use in mind, providing a simple pinout, adjustable parameters, and comprehensive application notes for guidance.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.