Texas Instruments
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
UCC3813DTR-4G4
Lihat Butiran Helaian data

UCC3813DTR-4G4

Product Overview

Category

UCC3813DTR-4G4 belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in power management applications.

Characteristics

  • Low-power consumption
  • High efficiency
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection

Package

UCC3813DTR-4G4 is available in a small outline package (SOP) with 8 pins.

Essence

The essence of UCC3813DTR-4G4 lies in its ability to efficiently regulate and control power in various electronic devices.

Packaging/Quantity

This IC is typically packaged in reels, with each reel containing a specific quantity of UCC3813DTR-4G4 units.

Specifications

  • Input Voltage Range: 2.7V - 18V
  • Output Voltage Range: 0.8V - 16V
  • Maximum Output Current: 500mA
  • Operating Temperature Range: -40°C to 85°C
  • Switching Frequency: 100kHz - 1MHz

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. RT/CT: Timing components connection pins
  6. SS/TR: Soft-start and shutdown control pin
  7. OUT: Regulated output voltage
  8. SYNC: Synchronization pin for multiple ICs

Functional Features

  • Voltage regulation: UCC3813DTR-4G4 provides precise output voltage regulation, ensuring stable power supply to connected devices.
  • Overcurrent protection: The IC incorporates overcurrent protection, safeguarding both the device and the load from excessive current flow.
  • Soft-start and shutdown control: The soft-start feature allows for gradual power-up, reducing stress on the system. The shutdown control enables efficient power management during standby or idle modes.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows for compatibility with various power sources.
  • Adjustable output voltage provides flexibility in different applications.
  • Overcurrent protection enhances system reliability.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Operating temperature range might not be suitable for extreme environments.

Working Principles

UCC3813DTR-4G4 operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the internal switch, which controls the energy transfer from the input to the output. By continuously monitoring the feedback voltage, the IC adjusts the duty cycle to maintain the desired output voltage.

Detailed Application Field Plans

UCC3813DTR-4G4 finds application in various fields, including: 1. Power supplies for consumer electronics 2. Battery-powered devices 3. Industrial automation systems 4. Automotive electronics 5. LED lighting systems

Detailed and Complete Alternative Models

  1. UCC3813DTR-5G4: Similar to UCC3813DTR-4G4 but with a different output voltage range.
  2. UCC3813DTR-3G4: Another variant with a lower maximum output current but wider operating temperature range.
  3. UCC3813DTR-4G1: A higher-performance version with additional features like adjustable switching frequency.

These alternative models offer similar functionality but may have specific differences in terms of voltage range, current capacity, or additional features.

Word count: 529 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi UCC3813DTR-4G4 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of UCC3813DTR-4G4 in technical solutions:

  1. Q: What is the UCC3813DTR-4G4? A: The UCC3813DTR-4G4 is a voltage mode PWM controller IC used for regulating power supplies.

  2. Q: What is the input voltage range of UCC3813DTR-4G4? A: The input voltage range of UCC3813DTR-4G4 is typically between 7V and 30V.

  3. Q: What is the output voltage range of UCC3813DTR-4G4? A: The output voltage range of UCC3813DTR-4G4 depends on the external components used, but it can be adjusted to meet specific requirements.

  4. Q: What is the maximum switching frequency of UCC3813DTR-4G4? A: The maximum switching frequency of UCC3813DTR-4G4 is typically around 500kHz.

  5. Q: Can UCC3813DTR-4G4 be used in both buck and boost converter applications? A: Yes, UCC3813DTR-4G4 can be used in both buck and boost converter applications.

  6. Q: Does UCC3813DTR-4G4 have built-in protection features? A: Yes, UCC3813DTR-4G4 has built-in protection features such as overcurrent protection and thermal shutdown.

  7. Q: What is the typical efficiency of UCC3813DTR-4G4? A: The typical efficiency of UCC3813DTR-4G4 depends on the specific application and external components used, but it can achieve high efficiency levels.

  8. Q: Can UCC3813DTR-4G4 operate in a wide temperature range? A: Yes, UCC3813DTR-4G4 is designed to operate in a wide temperature range, typically from -40°C to 125°C.

  9. Q: What type of control method does UCC3813DTR-4G4 use? A: UCC3813DTR-4G4 uses voltage mode control, which provides good stability and transient response.

  10. Q: Is UCC3813DTR-4G4 suitable for battery-powered applications? A: Yes, UCC3813DTR-4G4 is suitable for battery-powered applications as it can efficiently regulate power supplies with input voltages within its specified range.

Please note that the answers provided here are general and may vary depending on the specific application and design considerations. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.