XC6118C13BGR-G
Product Overview
Category
XC6118C13BGR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Package: BGA (Ball Grid Array)
- Essence: Voltage regulator IC (Integrated Circuit)
- Packaging/Quantity: Typically sold in reels or trays, with a quantity of 3000 units per reel.
Specifications
The specifications of XC6118C13BGR-G are as follows:
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.3V
- Output Current: 150mA
- Dropout Voltage: 200mV (at 100mA)
- Quiescent Current: 30µA (typical)
Detailed Pin Configuration
XC6118C13BGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
The functional features of XC6118C13BGR-G include:
- Low dropout voltage
- Low quiescent current
- Overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages: - Compact BGA package allows for space-saving designs - Low dropout voltage ensures efficient power conversion - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability
Disadvantages: - Limited output current capacity (150mA) - Restricted input voltage range (2.5V - 6.0V)
Working Principles
XC6118C13BGR-G operates based on the principle of voltage regulation. It takes an input voltage within the specified range and provides a stable output voltage of 1.3V, even when the input voltage fluctuates.
Detailed Application Field Plans
XC6118C13BGR-G finds applications in various electronic devices and circuits, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT (Internet of Things) devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C13BGR-G are: - XC6118C13BGR-G-AB: Similar specifications with additional features - XC6118C13BGR-H: Higher output current capacity - XC6118C13BGR-L: Lower dropout voltage
These alternative models provide flexibility in choosing a voltage regulator based on specific requirements.
Word count: 275 words
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6118C13BGR-G dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of XC6118C13BGR-G in technical solutions:
Q: What is XC6118C13BGR-G? A: XC6118C13BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C13BGR-G? A: The operating voltage range of XC6118C13BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C13BGR-G help in technical solutions? A: XC6118C13BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: Can XC6118C13BGR-G be used in battery-powered applications? A: Yes, XC6118C13BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6118C13BGR-G? A: XC6118C13BGR-G has an open-drain output type, which means it requires an external pull-up resistor to provide a logic-level signal.
Q: What is the typical reset threshold voltage of XC6118C13BGR-G? A: The typical reset threshold voltage of XC6118C13BGR-G is 1.3V.
Q: Does XC6118C13BGR-G have a built-in delay time for the reset signal? A: Yes, XC6118C13BGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Can XC6118C13BGR-G be used in automotive applications? A: Yes, XC6118C13BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6118C13BGR-G? A: XC6118C13BGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Q: Is XC6118C13BGR-G RoHS compliant? A: Yes, XC6118C13BGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C13BGR-G.