Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6118C30CGR-G
Lihat Butiran Helaian data

XC6118C30CGR-G

Product Overview

Category

XC6118C30CGR-G belongs to the category of voltage regulators.

Use

It is commonly used to regulate voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6118C30CGR-G is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of XC6118C30CGR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.0V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 25μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118C30CGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6118C30CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Low dropout voltage: The device operates efficiently even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes minimal current when not actively regulating the voltage.
  • Thermal shutdown protection: In case of excessive temperature, the device automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range provides flexibility in various applications.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Lack of built-in protection features, such as overcurrent or overvoltage protection.

Working Principles

XC6118C30CGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of active components, such as transistors, resistors, and capacitors.

Detailed Application Field Plans

XC6118C30CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C30CGR-G are: - LM1117-3.0: A popular voltage regulator with similar specifications. - MCP1702-3002E: Another voltage regulator offering stable 3.0V output. - TS2937CP-3.0: A low dropout voltage regulator suitable for various applications.

These alternative models provide similar functionality and can be used as replacements depending on specific requirements.

Word count: 399 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6118C30CGR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6118C30CGR-G in technical solutions:

  1. Q: What is XC6118C30CGR-G? A: XC6118C30CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C30CGR-G? A: The operating voltage range of XC6118C30CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C30CGR-G help in technical solutions? A: XC6118C30CGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.

  4. Q: What is the output type of XC6118C30CGR-G? A: XC6118C30CGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Q: What is the typical reset threshold voltage of XC6118C30CGR-G? A: The typical reset threshold voltage of XC6118C30CGR-G is 3.0V.

  6. Q: Can XC6118C30CGR-G be used in battery-powered applications? A: Yes, XC6118C30CGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.

  7. Q: Does XC6118C30CGR-G have any built-in delay for the reset signal? A: Yes, XC6118C30CGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.

  8. Q: Is XC6118C30CGR-G suitable for automotive applications? A: Yes, XC6118C30CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: Can XC6118C30CGR-G be used in industrial control systems? A: Absolutely, XC6118C30CGR-G is commonly used in industrial control systems to ensure reliable system startup and operation.

  10. Q: What is the package type of XC6118C30CGR-G? A: XC6118C30CGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various electronic designs.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.