XC6118C37AGR-G
Product Overview
Category
XC6118C37AGR-G belongs to the category of voltage regulators.
Use
It is commonly used to regulate and stabilize voltage in electronic circuits.
Characteristics
- Voltage regulation
- Stabilization of output voltage
- Low dropout voltage
- High accuracy
- Overcurrent protection
- Thermal shutdown protection
Package
XC6118C37AGR-G is available in a small surface-mount package.
Essence
The essence of XC6118C37AGR-G lies in its ability to provide stable and regulated voltage output for various electronic applications.
Packaging/Quantity
XC6118C37AGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.7V
- Dropout Voltage: 200mV (typical)
- Output Current: 150mA (maximum)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118C37AGR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation: XC6118C37AGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the current when it exceeds the specified threshold.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.
Advantages and Disadvantages
Advantages
- Low dropout voltage ensures efficient power utilization.
- High accuracy provides precise voltage regulation.
- Overcurrent and thermal shutdown protection enhance circuit safety.
Disadvantages
- Limited output current capacity (150mA maximum).
- Restricted input voltage range (2.5V - 6.0V).
Working Principles
XC6118C37AGR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output voltage.
Detailed Application Field Plans
XC6118C37AGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C37AGR-G are: - LM1117-3.3 - LT1761ES5-3.3 - MCP1700-3302E/TO
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 314 words
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6118C37AGR-G dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of XC6118C37AGR-G in technical solutions:
Q: What is XC6118C37AGR-G? A: XC6118C37AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C37AGR-G? A: The operating voltage range of XC6118C37AGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C37AGR-G help in technical solutions? A: XC6118C37AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: What is the typical reset voltage threshold of XC6118C37AGR-G? A: The typical reset voltage threshold of XC6118C37AGR-G is 3.7V.
Q: Can XC6118C37AGR-G be used in battery-powered applications? A: Yes, XC6118C37AGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Does XC6118C37AGR-G have any built-in delay for the reset signal? A: Yes, XC6118C37AGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6118C37AGR-G suitable for automotive applications? A: Yes, XC6118C37AGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification, ensuring high reliability and performance in harsh environments.
Q: Can XC6118C37AGR-G be used in low-power IoT devices? A: Yes, XC6118C37AGR-G is well-suited for low-power IoT devices due to its low quiescent current consumption, which helps conserve battery life.
Q: Does XC6118C37AGR-G have any built-in protection features? A: Yes, XC6118C37AGR-G has built-in overcurrent protection and thermal shutdown features to safeguard against abnormal operating conditions.
Q: What package options are available for XC6118C37AGR-G? A: XC6118C37AGR-G is available in a SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C37AGR-G.