Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6118N22DGR-G
Lihat Butiran Helaian data

XC6118N22DGR-G

Product Overview

Category

XC6118N22DGR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Package: DFN (Dual Flat No-Lead)
  • Essence: Low Dropout Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications of XC6118N22DGR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 2.2V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N22DGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

The functional features of XC6118N22DGR-G include:

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient regulation - Low quiescent current minimizes power consumption - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability

Disadvantages: - Limited output current capacity (150mA)

Working Principles

XC6118N22DGR-G works by regulating the input voltage to a stable output voltage of 2.2V. It achieves this through a combination of internal circuitry that adjusts the voltage based on the feedback received from the output pin.

Detailed Application Field Plans

XC6118N22DGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT (Internet of Things) devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N22DGR-G are: - XC6206P222MR-G - LM1117IMPX-2.2/NOPB - MCP1700T-2202E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 238 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6118N22DGR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6118N22DGR-G in technical solutions:

  1. Q: What is XC6118N22DGR-G? A: XC6118N22DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.

  2. Q: What is the operating voltage range of XC6118N22DGR-G? A: The operating voltage range of XC6118N22DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118N22DGR-G help in technical solutions? A: XC6118N22DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a certain level, ensuring proper system initialization.

  4. Q: Can XC6118N22DGR-G be used in battery-powered applications? A: Yes, XC6118N22DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: What is the output type of XC6118N22DGR-G? A: XC6118N22DGR-G has an open-drain output type, which means it can be easily interfaced with different logic levels.

  6. Q: What is the typical reset threshold voltage of XC6118N22DGR-G? A: The typical reset threshold voltage of XC6118N22DGR-G is 2.2V.

  7. Q: Does XC6118N22DGR-G have built-in hysteresis? A: Yes, XC6118N22DGR-G has built-in hysteresis, which helps to prevent false triggering of the reset signal due to voltage fluctuations or noise.

  8. Q: Can XC6118N22DGR-G be used in automotive applications? A: Yes, XC6118N22DGR-G is suitable for automotive applications as it meets the necessary requirements for temperature range, reliability, and ESD protection.

  9. Q: What is the package type of XC6118N22DGR-G? A: XC6118N22DGR-G is available in a small SOT-25 package, which is compact and space-saving.

  10. Q: Are there any application notes or reference designs available for XC6118N22DGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help in understanding and implementing XC6118N22DGR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation of XC6118N22DGR-G.