Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6118N37DGR-G
Lihat Butiran Helaian data

XC6118N37DGR-G

Product Overview

Category

XC6118N37DGR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Stable output
  • Low power consumption
  • Small package size
  • Wide input voltage range

Package

XC6118N37DGR-G is available in a small surface mount package.

Essence

The essence of XC6118N37DGR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6118N37DGR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.7V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 25μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N37DGR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6118N37DGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to avoid overheating.
  • Low quiescent current: The device consumes minimal current when no load is connected.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • Wide input voltage range makes it compatible with various power sources.
  • Low power consumption helps to extend battery life in portable devices.
  • Overcurrent protection ensures the safety of connected devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6118N37DGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. By continuously monitoring the output, it compensates for any changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6118N37DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N37DGR-G are: - XC6206P332MR-G - LM317T - LT1763CS8-3.3 - MCP1700-3302E/TO

These models offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 345 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6118N37DGR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6118N37DGR-G in technical solutions:

  1. Question: What is XC6118N37DGR-G?
    Answer: XC6118N37DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6118N37DGR-G?
    Answer: The operating voltage range of XC6118N37DGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6118N37DGR-G help in technical solutions?
    Answer: XC6118N37DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level.

  4. Question: Can XC6118N37DGR-G be used in battery-powered applications?
    Answer: Yes, XC6118N37DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Question: What is the output type of XC6118N37DGR-G?
    Answer: XC6118N37DGR-G has an open-drain output type, which means it can be easily interfaced with different logic levels.

  6. Question: What is the typical reset threshold voltage of XC6118N37DGR-G?
    Answer: The typical reset threshold voltage of XC6118N37DGR-G is 3.7V.

  7. Question: Can XC6118N37DGR-G be used for overvoltage protection?
    Answer: No, XC6118N37DGR-G is specifically designed for undervoltage detection and reset generation. It does not provide overvoltage protection.

  8. Question: What is the typical response time of XC6118N37DGR-G?
    Answer: The typical response time of XC6118N37DGR-G is 20ms, ensuring a quick reset signal when the voltage drops below the threshold.

  9. Question: Can XC6118N37DGR-G be used in automotive applications?
    Answer: Yes, XC6118N37DGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Question: Is XC6118N37DGR-G available in different package options?
    Answer: Yes, XC6118N37DGR-G is available in various package options, including SOT-25 and USP-4B, providing flexibility in design and integration.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.