Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6118N40AGR-G
Lihat Butiran Helaian data

XC6118N40AGR-G

Product Overview

Category

XC6118N40AGR-G belongs to the category of voltage regulators.

Use

It is primarily used for voltage regulation in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 4.0V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Package

XC6118N40AGR-G is available in a SOT-25 package.

Essence

The essence of XC6118N40AGR-G is its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

XC6118N40AGR-G is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 4.0V
  • Output Current: Up to 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Line Regulation: ±0.3% (typical)
  • Load Regulation: ±0.5% (typical)
  • Ripple Rejection Ratio: 60dB (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118N40AGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient voltage regulation even with low input voltages.
  • Low quiescent current minimizes power consumption in standby mode.
  • Excellent line and load regulation provide stable output voltage under varying conditions.
  • High ripple rejection ratio reduces the impact of input voltage fluctuations on the output.

Advantages

  • Wide input voltage range allows for versatile application in various electronic circuits.
  • Low dropout voltage enables efficient voltage regulation even with low input voltages.
  • Low quiescent current minimizes power consumption, making it suitable for battery-powered devices.
  • Compact SOT-25 package offers space-saving integration into small form factor designs.
  • Excellent line and load regulation ensure stable output voltage under different operating conditions.

Disadvantages

  • Limited maximum output current of 150mA may not be sufficient for high-power applications.
  • Dropout voltage of 200mV may cause a slight voltage drop across the regulator.

Working Principles

XC6118N40AGR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage from the output, adjusting the pass transistor's resistance to maintain a constant output voltage.

Detailed Application Field Plans

XC6118N40AGR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Industrial control systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118N40AGR-G are: - LM1117-4.0 - MCP1700-4002E/TO - TS2937CP-4.0

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and availability.

Word count: 407 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6118N40AGR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6118N40AGR-G in technical solutions:

  1. Question: What is XC6118N40AGR-G?
    - Answer: XC6118N40AGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6118N40AGR-G?
    - Answer: The operating voltage range of XC6118N40AGR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6118N40AGR-G help in technical solutions?
    - Answer: XC6118N40AGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the reset voltage threshold of XC6118N40AGR-G?
    - Answer: The reset voltage threshold of XC6118N40AGR-G is typically 4.0V.

  5. Question: Can XC6118N40AGR-G be used in battery-powered applications?
    - Answer: Yes, XC6118N40AGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  6. Question: Does XC6118N40AGR-G have any built-in delay time for the reset signal?
    - Answer: Yes, XC6118N40AGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  7. Question: What is the output type of XC6118N40AGR-G?
    - Answer: XC6118N40AGR-G has an open-drain output, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  8. Question: Can XC6118N40AGR-G withstand high temperatures?
    - Answer: Yes, XC6118N40AGR-G is designed to operate in a wide temperature range, typically from -40°C to +85°C, making it suitable for various industrial and automotive applications.

  9. Question: Is XC6118N40AGR-G available in different package options?
    - Answer: Yes, XC6118N40AGR-G is available in different package options, such as SOT-25 and USP-4B, providing flexibility for different PCB layouts and assembly processes.

  10. Question: Where can I find more information about XC6118N40AGR-G?
    - Answer: You can find more detailed information about XC6118N40AGR-G, including datasheets, application notes, and technical specifications, on the manufacturer's website or by contacting their customer support.