XC6118N44DGR-G
Product Overview
Category
XC6118N44DGR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Package: DFN (Dual Flat No-Lead)
- Essence: Low dropout voltage regulator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
The specifications of XC6118N44DGR-G are as follows:
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.2V to 5.0V
- Dropout Voltage: 200mV (typical)
- Output Current: 150mA (maximum)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118N44DGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- VOUT: Output voltage pin
Functional Features
The functional features of XC6118N44DGR-G include:
- Low dropout voltage for efficient regulation
- Low quiescent current for power-saving operation
- Built-in overcurrent protection
- Thermal shutdown protection
- Short-circuit protection
Advantages and Disadvantages
Advantages: - Low dropout voltage ensures efficient voltage regulation - Low quiescent current minimizes power consumption - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability
Disadvantages: - Limited output current capacity (150mA maximum)
Working Principles
XC6118N44DGR-G works by regulating the input voltage to a stable output voltage within the specified range. It achieves this by utilizing a feedback mechanism that continuously adjusts the internal circuitry to maintain the desired output voltage, even in the presence of varying input voltages and load conditions.
Detailed Application Field Plans
XC6118N44DGR-G finds applications in various electronic devices and systems, including but not limited to:
- Battery-powered devices
- Portable consumer electronics
- IoT (Internet of Things) devices
- Wearable devices
- Automotive electronics
- Industrial control systems
Detailed and Complete Alternative Models
Some alternative models to XC6118N44DGR-G with similar functionality are:
- XC6206P332MR-G
- XC6220B332MR-G
- XC6219B332MR-G
- XC6220C332MR-G
- XC6220D332MR-G
These models offer comparable voltage regulation capabilities and can be considered as alternatives based on specific application requirements.
Word count: 305 words
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6118N44DGR-G dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of XC6118N44DGR-G in technical solutions:
1. What is XC6118N44DGR-G? - XC6118N44DGR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
2. What is the operating voltage range of XC6118N44DGR-G? - The operating voltage range of XC6118N44DGR-G is typically between 0.7V and 6.0V.
3. How does XC6118N44DGR-G work? - XC6118N44DGR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal that can be used to control other components in the system.
4. What is the typical quiescent current of XC6118N44DGR-G? - The typical quiescent current of XC6118N44DGR-G is very low, usually around 1.0µA, making it suitable for battery-powered applications.
5. Can XC6118N44DGR-G be used for overvoltage protection? - No, XC6118N44DGR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.
6. What is the output configuration of XC6118N44DGR-G? - XC6118N44DGR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.
7. Is XC6118N44DGR-G suitable for automotive applications? - Yes, XC6118N44DGR-G is AEC-Q100 qualified and can be used in automotive applications that require undervoltage detection.
8. What is the temperature range of XC6118N44DGR-G? - The operating temperature range of XC6118N44DGR-G is typically between -40°C and +85°C.
9. Can XC6118N44DGR-G be used in a 3.3V system? - Yes, XC6118N44DGR-G is compatible with 3.3V systems as it operates within the typical voltage range of 0.7V to 6.0V.
10. Does XC6118N44DGR-G have any built-in hysteresis? - Yes, XC6118N44DGR-G has a built-in hysteresis of typically 50mV, which helps to prevent oscillation and provide stable voltage monitoring.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.