XC6120C172NR-G
Product Overview
Category
XC6120C172NR-G belongs to the category of electronic components.
Use
It is used in various electronic devices and circuits for voltage regulation purposes.
Characteristics
- Voltage regulation capability
- Compact size
- Low power consumption
- Wide input voltage range
- High efficiency
Package
XC6120C172NR-G comes in a small surface mount package.
Essence
The essence of XC6120C172NR-G lies in its ability to regulate voltage efficiently and reliably in electronic circuits.
Packaging/Quantity
XC6120C172NR-G is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.7V
- Maximum Output Current: 200mA
- Dropout Voltage: 150mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6120C172NR-G has the following pin configuration:
```
| | --| VIN VOUT |-- --| GND EN |-- |___________| ```
- VIN: Input voltage pin
- VOUT: Output voltage pin
- GND: Ground pin
- EN: Enable pin (used for enabling/disabling the regulator)
Functional Features
- Voltage regulation: XC6120C172NR-G provides a stable output voltage of 1.7V regardless of input voltage fluctuations.
- Low dropout voltage: The regulator has a low dropout voltage, ensuring efficient power conversion even with low input voltages.
- Low quiescent current: The device consumes minimal current when in standby mode, reducing power consumption.
- Thermal shutdown protection: XC6120C172NR-G includes built-in thermal shutdown protection to prevent overheating.
Advantages and Disadvantages
Advantages
- Compact size allows for easy integration into small electronic devices.
- Wide input voltage range makes it suitable for a variety of applications.
- High efficiency ensures minimal power loss during voltage regulation.
Disadvantages
- Limited output current may not be sufficient for high-power applications.
- Lack of adjustable output voltage limits flexibility in certain scenarios.
Working Principles
XC6120C172NR-G operates based on the principle of linear voltage regulation. It utilizes an internal reference voltage and feedback mechanism to maintain a constant output voltage regardless of input voltage variations. The regulator adjusts its internal circuitry to provide the desired output voltage while minimizing power dissipation.
Detailed Application Field Plans
XC6120C172NR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable audio players - Wearable devices - IoT (Internet of Things) devices - Embedded systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6120C172NR-G are: - XC6201C182MR-G - XC6220B152MR-G - XC6219B332MR-G - XC6230D502MR-G - XC6240E102MR-G
These models offer similar voltage regulation capabilities with slight variations in specifications and package options.
In conclusion, XC6120C172NR-G is a compact and efficient voltage regulator used in various electronic devices and circuits. Its stable output voltage, low power consumption, and wide input voltage range make it suitable for a range of applications. However, its limited output current and fixed output voltage may pose limitations in certain scenarios.
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6120C172NR-G dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of XC6120C172NR-G in technical solutions:
Q: What is XC6120C172NR-G? A: XC6120C172NR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6120C172NR-G? A: The operating voltage range of XC6120C172NR-G is typically between 0.8V and 6.0V.
Q: How does XC6120C172NR-G work? A: XC6120C172NR-G works by continuously monitoring the input voltage and comparing it to a preset threshold. When the input voltage falls below or exceeds this threshold, the output of the IC changes state, indicating a power supply fault.
Q: What is the output configuration of XC6120C172NR-G? A: XC6120C172NR-G has an open-drain output configuration, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.
Q: What is the typical quiescent current consumption of XC6120C172NR-G? A: The typical quiescent current consumption of XC6120C172NR-G is very low, usually around 1.0µA.
Q: Can XC6120C172NR-G be used in battery-powered applications? A: Yes, XC6120C172NR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.
Q: What is the accuracy of the voltage detection threshold in XC6120C172NR-G? A: The accuracy of the voltage detection threshold in XC6120C172NR-G is typically ±1.5%.
Q: Can XC6120C172NR-G be used for overvoltage and undervoltage protection? A: Yes, XC6120C172NR-G can be used for both overvoltage and undervoltage protection by setting the appropriate voltage detection threshold.
Q: What is the temperature range in which XC6120C172NR-G operates reliably? A: XC6120C172NR-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.
Q: Are there any application notes or reference designs available for XC6120C172NR-G? A: Yes, Torex Semiconductor provides application notes and reference designs for XC6120C172NR-G on their official website, which can help users understand its usage in different technical solutions.
Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer.