XC6120N102HR-G
Product Overview
Category
The XC6120N102HR-G belongs to the category of voltage regulators.
Use
It is used to regulate voltage in electronic circuits and devices.
Characteristics
- Low dropout voltage
- Low quiescent current
- High ripple rejection
- Built-in overcurrent protection
Package
The XC6120N102HR-G comes in a small SOT-23-5 package.
Essence
This voltage regulator is essential for maintaining stable voltage levels in various electronic applications.
Packaging/Quantity
The XC6120N102HR-G is typically packaged in reels with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 1.0V
- Maximum Output Current: 150mA
- Dropout Voltage: 160mV @ 100mA
- Quiescent Current: 30μA (typical)
- Ripple Rejection: 70dB @ 1kHz
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
The XC6120N102HR-G has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. CE (Chip Enable)
Functional Features
- Overcurrent Protection: The device includes built-in overcurrent protection to safeguard against excessive current flow.
- Low Dropout Voltage: The low dropout voltage ensures efficient regulation even when the input voltage is close to the output voltage.
- Low Quiescent Current: The low quiescent current minimizes power consumption during standby or idle modes.
- High Ripple Rejection: The high ripple rejection capability helps maintain a stable output voltage in the presence of input voltage fluctuations.
Advantages and Disadvantages
Advantages
- Small package size
- Low dropout voltage
- Built-in overcurrent protection
Disadvantages
- Limited maximum output current (150mA)
Working Principles
The XC6120N102HR-G operates by comparing the reference voltage with the feedback voltage to adjust the output voltage, ensuring a stable and regulated output despite variations in the input voltage.
Detailed Application Field Plans
The XC6120N102HR-G is suitable for various applications, including: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the XC6120N102HR-G include: - XC6206P102MR-G - XC6220B102MR-G - XC6210B102MR-G - XC6220C102MR-G
In summary, the XC6120N102HR-G is a versatile voltage regulator with a compact form factor and essential features for maintaining stable voltage levels in diverse electronic applications.
[Word count: 411]
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6120N102HR-G dalam penyelesaian teknikal
What is the operating voltage range of XC6120N102HR-G?
- The operating voltage range of XC6120N102HR-G is 1.2V to 6.0V.
What is the typical quiescent current of XC6120N102HR-G?
- The typical quiescent current of XC6120N102HR-G is 0.5µA.
What is the maximum output current of XC6120N102HR-G?
- The maximum output current of XC6120N102HR-G is 200mA.
What is the typical dropout voltage of XC6120N102HR-G?
- The typical dropout voltage of XC6120N102HR-G is 160mV at 100mA load.
What are the typical applications for XC6120N102HR-G?
- Typical applications for XC6120N102HR-G include battery-powered devices, portable equipment, and power management in various electronic devices.
Does XC6120N102HR-G have built-in overcurrent protection?
- Yes, XC6120N102HR-G has built-in overcurrent protection.
What is the thermal shutdown temperature of XC6120N102HR-G?
- The thermal shutdown temperature of XC6120N102HR-G is approximately 150°C.
Is XC6120N102HR-G available in a SOT-23 package?
- Yes, XC6120N102HR-G is available in a SOT-23 package.
What is the typical line regulation of XC6120N102HR-G?
- The typical line regulation of XC6120N102HR-G is 0.05%/V.
Can XC6120N102HR-G be used in automotive applications?
- Yes, XC6120N102HR-G can be used in automotive applications as it meets AEC-Q100 standards.