Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6120N252HR-G
Lihat Butiran Helaian data

XC6120N252HR-G

Product Overview

Category

XC6120N252HR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • High efficiency
  • Low power consumption

Package

XC6120N252HR-G is available in a small form factor package, which makes it suitable for space-constrained applications.

Essence

The essence of XC6120N252HR-G lies in its ability to regulate voltage and manage power efficiently, ensuring stable operation of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 200mA
  • Dropout Voltage: 150mV @ 100mA
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6120N252HR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: The XC6120N252HR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to prevent damage.
  • Low quiescent current: The low quiescent current minimizes power consumption during standby mode.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide input and output voltage ranges provide flexibility in various applications.
  • Overcurrent protection ensures the safety of connected devices.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the device.

Working Principles

The XC6120N252HR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This feedback loop continuously monitors and regulates the output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6120N252HR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6120N252HR-G are: - XC6120N252MR-G - XC6120N252LR-G - XC6120N252GR-G - XC6120N252DR-G

These models have different specifications and characteristics, allowing users to choose the most suitable option for their specific requirements.

Word count: 430 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6120N252HR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6120N252HR-G in technical solutions:

  1. Question: What is XC6120N252HR-G?
    - Answer: XC6120N252HR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions.

  2. Question: What is the operating voltage range of XC6120N252HR-G?
    - Answer: The operating voltage range of XC6120N252HR-G is typically between 0.8V and 6.0V.

  3. Question: What is the purpose of using XC6120N252HR-G in technical solutions?
    - Answer: XC6120N252HR-G is primarily used as a voltage monitoring and detection component in electronic circuits. It helps ensure stable operation by detecting overvoltage or undervoltage conditions.

  4. Question: Can XC6120N252HR-G be used in battery-powered applications?
    - Answer: Yes, XC6120N252HR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Question: How does XC6120N252HR-G detect voltage levels?
    - Answer: XC6120N252HR-G uses an internal voltage reference and a voltage comparator to detect whether the input voltage is above or below a certain threshold.

  6. Question: What is the output configuration of XC6120N252HR-G?
    - Answer: XC6120N252HR-G has an open-drain output configuration, which means it can be easily interfaced with other digital logic circuits.

  7. Question: Can XC6120N252HR-G be used for both overvoltage and undervoltage detection?
    - Answer: Yes, XC6120N252HR-G can be configured to detect both overvoltage and undervoltage conditions by setting the appropriate threshold voltage levels.

  8. Question: What is the typical accuracy of XC6120N252HR-G in voltage detection?
    - Answer: The typical accuracy of XC6120N252HR-G is around ±2% of the threshold voltage.

  9. Question: Is XC6120N252HR-G suitable for automotive applications?
    - Answer: Yes, XC6120N252HR-G is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 Grade 1 qualification.

  10. Question: Can XC6120N252HR-G be used in conjunction with a microcontroller?
    - Answer: Yes, XC6120N252HR-G can be easily integrated with a microcontroller or other digital devices to provide voltage monitoring and control functionality.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with technical experts for accurate information.