XC6121A426MR-G belongs to the category of voltage regulators.
It is used to regulate and stabilize the voltage in electronic circuits.
XC6121A426MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
The XC6121A426MR-G has the following pin configuration:
```
| | --|----|-- |____| ```
Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: NC (No Connection) Pin 4: VOUT (Output Voltage) Pin 5: EN (Enable)
The XC6121A426MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor accordingly to maintain a stable output voltage. The dropout voltage is minimized to ensure efficient voltage regulation even when the input voltage is close to the desired output voltage.
The XC6121A426MR-G can be used in various electronic devices and systems, including but not limited to:
These alternative models offer flexibility in voltage requirements and operating conditions, catering to different application needs.
Word count: 554 words
Sure! Here are 10 common questions and answers related to the application of XC6121A426MR-G in technical solutions:
Q1: What is XC6121A426MR-G? A1: XC6121A426MR-G is a specific model of voltage regulator IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to regulate voltage in electronic circuits.
Q2: What is the input voltage range for XC6121A426MR-G? A2: The input voltage range for XC6121A426MR-G is typically between 2.5V and 6.0V.
Q3: What is the output voltage of XC6121A426MR-G? A3: The output voltage of XC6121A426MR-G is fixed at 4.26V.
Q4: What is the maximum output current of XC6121A426MR-G? A4: The maximum output current of XC6121A426MR-G is typically 200mA.
Q5: What is the operating temperature range for XC6121A426MR-G? A5: The operating temperature range for XC6121A426MR-G is usually -40°C to +85°C.
Q6: Is XC6121A426MR-G suitable for battery-powered applications? A6: Yes, XC6121A426MR-G is suitable for battery-powered applications as it has low quiescent current and low dropout voltage characteristics.
Q7: Can XC6121A426MR-G be used in automotive applications? A7: Yes, XC6121A426MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q8: Does XC6121A426MR-G have built-in protection features? A8: Yes, XC6121A426MR-G has built-in protection features such as overcurrent protection, thermal shutdown, and reverse current protection.
Q9: What is the package type of XC6121A426MR-G? A9: XC6121A426MR-G is available in a small SOT-25 package.
Q10: Can XC6121A426MR-G be used in space-constrained applications? A10: Yes, XC6121A426MR-G is suitable for space-constrained applications due to its compact size and low profile package.
Please note that the answers provided above are general and may vary depending on specific datasheet specifications or application requirements.