Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6121D320ER-G

XC6121D320ER-G

Product Overview

Category

XC6121D320ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6121D320ER-G comes in a small SOT-23-5 package.
  • Essence: This voltage regulator is designed to provide stable and regulated output voltage.
  • Packaging/Quantity: It is typically sold in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6121D320ER-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.2V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 30µA (typical)

Pin Configuration

The pin configuration of XC6121D320ER-G is as follows:

```


| | --| EN |-- Enable Pin --| GND |-- Ground Pin --| VIN |-- Input Voltage Pin --| VOUT |-- Output Voltage Pin |____| ```

Functional Features

The XC6121D320ER-G offers the following functional features:

  • Low dropout voltage ensures efficient regulation even with low input voltages.
  • Built-in overcurrent protection safeguards the circuit from excessive current flow.
  • Thermal shutdown protection prevents damage due to overheating.
  • Stable output voltage provides reliable performance for connected devices.

Advantages and Disadvantages

Advantages: - Small package size allows for space-saving designs. - Low quiescent current minimizes power consumption. - Wide input voltage range enhances versatility.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Dropout voltage may affect efficiency in certain scenarios.

Working Principles

The XC6121D320ER-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6121D320ER-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6121D320ER-G are: - XC6121C320ER-G: Similar specifications, but with a different package type (SOT-89-5). - XC6121D330ER-G: Slightly higher output voltage (3.3V) with similar characteristics. - XC6121E310ER-G: Lower output voltage (3.1V) with similar characteristics.

Please note that these alternative models may have slight differences in performance and package size.

Word count: 315 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6121D320ER-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6121D320ER-G in technical solutions:

1. What is XC6121D320ER-G? - XC6121D320ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

2. What is the operating voltage range of XC6121D320ER-G? - The operating voltage range of XC6121D320ER-G is from 0.8V to 6.0V.

3. What is the typical voltage detection accuracy of XC6121D320ER-G? - The typical voltage detection accuracy of XC6121D320ER-G is ±1.5%.

4. What is the output configuration of XC6121D320ER-G? - XC6121D320ER-G has an open-drain output configuration, which means it can sink current but cannot source current.

5. What is the maximum sinking current capability of XC6121D320ER-G? - The maximum sinking current capability of XC6121D320ER-G is 50mA.

6. Can XC6121D320ER-G be used for overvoltage detection? - No, XC6121D320ER-G is specifically designed for undervoltage detection. For overvoltage detection, a different voltage detector IC should be used.

7. What is the typical quiescent current consumption of XC6121D320ER-G? - The typical quiescent current consumption of XC6121D320ER-G is 1.0µA.

8. Is XC6121D320ER-G suitable for battery-powered applications? - Yes, XC6121D320ER-G is suitable for battery-powered applications due to its low quiescent current consumption.

9. Can XC6121D320ER-G be used in automotive applications? - Yes, XC6121D320ER-G is AEC-Q100 qualified and can be used in automotive applications.

10. What is the package type of XC6121D320ER-G? - XC6121D320ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that these answers are based on general information about XC6121D320ER-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed technical specifications and guidelines.