Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6121D719MR-G
Lihat Butiran Helaian data

XC6121D719MR-G

Product Overview

Category

XC6121D719MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • Low power consumption

Package

XC6121D719MR-G is available in a small surface-mount package.

Essence

The essence of XC6121D719MR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6121D719MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.8V - 5.0V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6121D719MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices
  • Low power consumption helps to extend battery life
  • Provides stable and regulated voltage output
  • Offers protection against overcurrent, thermal shutdown, and short-circuits

Disadvantages

  • Limited maximum output current of 150mA
  • Input voltage range is restricted to 2.5V - 6.0V

Working Principles

XC6121D719MR-G works by regulating the input voltage to provide a stable and regulated output voltage. It achieves this through internal circuitry that monitors the input voltage and adjusts it as necessary.

Detailed Application Field Plans

XC6121D719MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models to XC6121D719MR-G include: - XC6121C519MR-G - XC6121E619MR-G - XC6121F819MR-G - XC6121G919MR-G

These models offer similar functionality and characteristics, with slight variations in specifications.

Word count: 314 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6121D719MR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6121D719MR-G in technical solutions:

1. What is XC6121D719MR-G? - XC6121D719MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

2. What is the operating voltage range of XC6121D719MR-G? - The operating voltage range of XC6121D719MR-G is typically between 0.8V and 6.0V.

3. How does XC6121D719MR-G work? - XC6121D719MR-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, the output pin of the IC becomes active, indicating a low voltage condition.

4. What is the output type of XC6121D719MR-G? - XC6121D719MR-G has an open-drain output type, which means it can sink current but cannot source current. An external pull-up resistor is required to pull the output signal high.

5. What is the typical quiescent current of XC6121D719MR-G? - The typical quiescent current of XC6121D719MR-G is around 1.0µA, making it suitable for low-power applications.

6. Can XC6121D719MR-G be used in battery-powered devices? - Yes, XC6121D719MR-G is well-suited for battery-powered devices due to its low quiescent current and wide operating voltage range.

7. What is the accuracy of the voltage detection threshold in XC6121D719MR-G? - The accuracy of the voltage detection threshold in XC6121D719MR-G is typically ±1.5%.

8. Can XC6121D719MR-G be used for overvoltage protection? - No, XC6121D719MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

9. What is the response time of XC6121D719MR-G? - The response time of XC6121D719MR-G is typically 200µs, which is the time it takes for the output to become active after the input voltage falls below the detection threshold.

10. Is XC6121D719MR-G available in different package options? - Yes, XC6121D719MR-G is available in a SOT-25 package, which is a small surface-mount package with three leads.