Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6122A248ER-G
Lihat Butiran Helaian data

XC6122A248ER-G

Product Overview

Category

XC6122A248ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122A248ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6122A248ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6122A248ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.4V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A248ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation
  • Overcurrent protection
  • Thermal shutdown protection
  • Enable/disable control

Advantages and Disadvantages

Advantages

  • Small form factor
  • High efficiency
  • Wide input voltage range
  • Overcurrent and thermal protection

Disadvantages

  • Limited output current capacity (100mA)

Working Principles

XC6122A248ER-G operates by comparing the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6122A248ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A248ER-G are: - XC6206P242MR-G - LM1117IMPX-2.4/NOPB - MCP1700T-2402E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6122A248ER-G is a compact and efficient voltage regulator with a wide range of applications. Its small form factor, high efficiency, and built-in protection features make it an ideal choice for various electronic devices.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6122A248ER-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6122A248ER-G in technical solutions:

  1. Question: What is XC6122A248ER-G?
    - Answer: XC6122A248ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122A248ER-G?
    - Answer: The operating voltage range of XC6122A248ER-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6122A248ER-G?
    - Answer: XC6122A248ER-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  4. Question: What is the typical quiescent current consumption of XC6122A248ER-G?
    - Answer: The typical quiescent current consumption of XC6122A248ER-G is around 1.0µA, making it suitable for low-power applications.

  5. Question: Can XC6122A248ER-G be used for overvoltage detection?
    - Answer: No, XC6122A248ER-G is specifically designed for undervoltage detection. It triggers an output signal when the monitored voltage falls below a certain threshold.

  6. Question: What is the accuracy of the undervoltage detection threshold in XC6122A248ER-G?
    - Answer: The accuracy of the undervoltage detection threshold in XC6122A248ER-G is typically ±2%.

  7. Question: Does XC6122A248ER-G have built-in hysteresis?
    - Answer: Yes, XC6122A248ER-G has built-in hysteresis to prevent output oscillation near the detection threshold. The typical hysteresis width is 10% of the detection voltage.

  8. Question: Can XC6122A248ER-G be used in automotive applications?
    - Answer: Yes, XC6122A248ER-G is AEC-Q100 qualified and suitable for automotive applications, provided it meets the specific requirements of the automotive system.

  9. Question: What is the package type of XC6122A248ER-G?
    - Answer: XC6122A248ER-G is available in a SOT-25 package, which is a small surface-mount package with three leads.

  10. Question: Are there any application notes or reference designs available for XC6122A248ER-G?
    - Answer: Yes, Torex Semiconductor provides application notes and reference designs for XC6122A248ER-G on their official website. These resources can help users understand the best practices for integrating the IC into their technical solutions.