Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6122C432MR-G
Lihat Butiran Helaian data

XC6122C432MR-G

Product Overview

Category

XC6122C432MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: SOT-25
  • Essence: Low-power voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

The specifications of XC6122C432MR-G are as follows:

  • Input Voltage Range: 1.7V to 6.0V
  • Output Voltage: 4.3V ±2%
  • Maximum Output Current: 200mA
  • Dropout Voltage: 160mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C432MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

The functional features of XC6122C432MR-G include:

  • Low quiescent current for power-saving applications
  • High output voltage accuracy
  • Wide input voltage range
  • Low dropout voltage for efficient operation
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low power consumption - Stable and accurate output voltage - Small package size - Wide operating temperature range

Disadvantages: - Limited maximum output current - Not suitable for high-power applications

Working Principles

XC6122C432MR-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The internal circuitry ensures that the output voltage remains constant even with variations in the input voltage.

Detailed Application Field Plans

XC6122C432MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122C432MR-G are: - XC6122C432MR (without the "-G" suffix) - XC6122C432ML-G - XC6122C432ML

These models have similar specifications and functionality, providing flexibility in choosing the most suitable voltage regulator for specific applications.

Word count: 297 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6122C432MR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6122C432MR-G in technical solutions:

  1. Question: What is XC6122C432MR-G?
    - Answer: XC6122C432MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122C432MR-G?
    - Answer: The operating voltage range of XC6122C432MR-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6122C432MR-G?
    - Answer: XC6122C432MR-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Question: What is the typical quiescent current consumption of XC6122C432MR-G?
    - Answer: The typical quiescent current consumption of XC6122C432MR-G is around 1.0µA.

  5. Question: Can XC6122C432MR-G be used for overvoltage detection?
    - Answer: No, XC6122C432MR-G is specifically designed for undervoltage detection. It triggers an output signal when the monitored voltage falls below a certain threshold.

  6. Question: What is the accuracy of the undervoltage detection threshold in XC6122C432MR-G?
    - Answer: The accuracy of the undervoltage detection threshold in XC6122C432MR-G is typically ±1.5%.

  7. Question: Does XC6122C432MR-G have built-in hysteresis?
    - Answer: Yes, XC6122C432MR-G has built-in hysteresis, which helps to prevent output oscillation near the detection threshold.

  8. Question: What is the maximum voltage that XC6122C432MR-G can withstand on its input pin?
    - Answer: The maximum voltage that XC6122C432MR-G can withstand on its input pin is 10V.

  9. Question: Can XC6122C432MR-G be used in automotive applications?
    - Answer: Yes, XC6122C432MR-G is AEC-Q100 qualified and suitable for automotive applications.

  10. Question: Is XC6122C432MR-G available in a surface-mount package?
    - Answer: Yes, XC6122C432MR-G is available in a compact SOT-25 package, which is suitable for surface-mount assembly.

Please note that these answers are based on general information about XC6122C432MR-G and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for accurate and detailed information.