Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6122D450ER-G

XC6122D450ER-G

Product Overview

Category

XC6122D450ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: SOT-23-5
  • Essence: Low dropout voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

The specifications of XC6122D450ER-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 4.5V
  • Dropout Voltage: 200mV (typical)
  • Output Current: 150mA (maximum)
  • Quiescent Current: 30µA (typical)
  • Line Regulation: ±0.1% (typical)
  • Load Regulation: ±0.3% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D450ER-G has a total of five pins arranged as follows:

```


| | --| |-- |____| ```

Pin 1: VIN (Input voltage) Pin 2: GND (Ground) Pin 3: NC (No connection) Pin 4: VOUT (Output voltage) Pin 5: EN (Enable)

Functional Features

  • Low dropout voltage: The XC6122D450ER-G exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
  • Low quiescent current: With a typical quiescent current of only 30µA, this voltage regulator minimizes power consumption in standby or idle modes.
  • Thermal shutdown protection: The device incorporates thermal shutdown protection, preventing damage due to excessive temperature.

Advantages and Disadvantages

Advantages

  • Low dropout voltage ensures efficient regulation.
  • Low quiescent current minimizes power consumption.
  • Thermal shutdown protection prevents damage from overheating.

Disadvantages

  • Limited output current of 150mA may not be suitable for high-power applications.
  • No adjustable output voltage option available.

Working Principles

XC6122D450ER-G operates based on the principle of a linear voltage regulator. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The device compares the output voltage with a reference voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6122D450ER-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable audio players - Mobile phones - Digital cameras - Wearable devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D450ER-G are: - LM1117-4.5: A low dropout voltage regulator with similar specifications. - MCP1700-4.5: Another low dropout voltage regulator offering comparable performance. - LP2985-4.5: A low quiescent current voltage regulator suitable for low-power applications.

These alternative models provide similar functionality and can be used as substitutes depending on specific requirements.

Word count: 366 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6122D450ER-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6122D450ER-G in technical solutions:

  1. Question: What is XC6122D450ER-G?
    - Answer: XC6122D450ER-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the power supply voltage and provide a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6122D450ER-G?
    - Answer: The operating voltage range of XC6122D450ER-G is from 0.9V to 6.0V.

  3. Question: What is the typical reset voltage of XC6122D450ER-G?
    - Answer: The typical reset voltage of XC6122D450ER-G is 4.5V.

  4. Question: How does XC6122D450ER-G detect the voltage level?
    - Answer: XC6122D450ER-G uses an internal voltage reference and a comparator to compare the input voltage with the reference voltage. When the input voltage drops below the reference voltage, it triggers the reset signal.

  5. Question: Can XC6122D450ER-G be used in battery-powered applications?
    - Answer: Yes, XC6122D450ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0μA.

  6. Question: What is the output type of XC6122D450ER-G?
    - Answer: XC6122D450ER-G has an open-drain output type, which means it requires an external pull-up resistor to provide a logic-level signal.

  7. Question: Is XC6122D450ER-G suitable for automotive applications?
    - Answer: Yes, XC6122D450ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.

  8. Question: Can XC6122D450ER-G be used in a wide temperature range?
    - Answer: Yes, XC6122D450ER-G has an operating temperature range of -40°C to +105°C, making it suitable for various environments.

  9. Question: What is the package type of XC6122D450ER-G?
    - Answer: XC6122D450ER-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

  10. Question: Are there any additional features of XC6122D450ER-G?
    - Answer: Yes, XC6122D450ER-G has built-in hysteresis and a delay circuit to prevent false resets and provide stable operation in noisy environments.

Please note that the answers provided here are general and may vary depending on the specific application and requirements.