XC6122E435MR-G

Product Overview

Use

It is primarily used for voltage regulation in electronic circuits.

Characteristics

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 4.35V
Maximum Output Current: 200mA
Low Quiescent Current: 1.0μA (typical)
Low Dropout Voltage: 100mV at 100mA (typical)
Package Type: SOT-25
Operating Temperature Range: -40°C to +85°C

Package and Quantity

XC6122E435MR-G is available in a SOT-25 package. It is typically sold in reels or tubes containing a specific quantity of units.

Specifications

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 4.35V ±2%
Output Current: Up to 200mA
Dropout Voltage: 100mV at 100mA (typical)
Quiescent Current: 1.0μA (typical)
Line Regulation: ±0.3% (typical)
Load Regulation: ±0.5% (typical)
Ripple Rejection Ratio: 60dB (typical)
Operating Temperature Range: -40°C to +85°C

Pin Configuration

The XC6122E435MR-G has the following pin configuration:

```

| | --|----|-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: VOUT (Output Voltage)

Functional Features

Low quiescent current ensures minimal power consumption when the device is in standby mode.
Low dropout voltage allows for efficient regulation even when the input voltage is close to the desired output voltage.
Wide input voltage range provides flexibility in various applications.
Good ripple rejection ratio helps maintain a stable output voltage in the presence of noise.

Advantages

Small package size (SOT-25) makes it suitable for space-constrained designs.
Low quiescent current prolongs battery life in portable devices.
Wide operating temperature range enables reliable performance in harsh environments.

Disadvantages

Limited maximum output current may not be suitable for high-power applications.
Fixed output voltage may not be adjustable for specific requirements.

Working Principles

XC6122E435MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage and adjusting the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6122E435MR-G can be used in various electronic applications, including but not limited to: - Battery-powered devices - Portable audio players - Wearable devices - IoT modules - Industrial control systems

Alternative Models

Other voltage regulators that can be considered as alternatives to XC6122E435MR-G include: - XC6122 series: Different output voltage options available - LM1117: Adjustable output voltage - MCP1700: Low quiescent current variant

Please note that the above list is not exhaustive, and there are several other alternative models available in the market.

Word count: 430 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6122E435MR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6122E435MR-G in technical solutions:

Q: What is XC6122E435MR-G? A: XC6122E435MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Q: What is the operating voltage range of XC6122E435MR-G? A: The operating voltage range of XC6122E435MR-G is from 0.8V to 6.0V.
Q: How does XC6122E435MR-G work? A: XC6122E435MR-G works by comparing the input voltage with a reference voltage. When the input voltage drops below the reference voltage, it triggers an internal circuit that generates an output signal.
Q: What is the output type of XC6122E435MR-G? A: XC6122E435MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.
Q: What is the typical quiescent current of XC6122E435MR-G? A: The typical quiescent current of XC6122E435MR-G is 1.0µA, making it suitable for low-power applications.
Q: Can XC6122E435MR-G be used in battery-powered devices? A: Yes, XC6122E435MR-G is ideal for battery-powered devices due to its low quiescent current and wide operating voltage range.
Q: Does XC6122E435MR-G have built-in hysteresis? A: Yes, XC6122E435MR-G has built-in hysteresis of typically 50mV, which helps to prevent oscillation and provide stable voltage monitoring.
Q: What is the maximum output current of XC6122E435MR-G? A: The maximum output current of XC6122E435MR-G is 25mA, allowing it to drive external loads directly.
Q: Can XC6122E435MR-G be used in automotive applications? A: Yes, XC6122E435MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.
Q: Are there any additional features of XC6122E435MR-G? A: Yes, XC6122E435MR-G includes a power-on reset function that ensures proper system initialization when the power supply is turned on.

Please note that these answers are based on general information and it's always recommended to refer to the datasheet and consult with the manufacturer for specific application requirements.