Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6123A321MR-G
Lihat Butiran Helaian data

XC6123A321MR-G

Product Overview

Category

XC6123A321MR-G belongs to the category of voltage regulators.

Use

It is used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123A321MR-G is available in a small surface-mount package.

Essence

The essence of XC6123A321MR-G is to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

XC6123A321MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123A321MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6123A321MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current to a safe level.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small size allows for space-saving designs.
  • High efficiency reduces power consumption.
  • Wide input voltage range provides flexibility in various applications.
  • Overcurrent and thermal shutdown protection enhance reliability.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6123A321MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved by controlling the flow of current through a pass transistor.

Detailed Application Field Plans

XC6123A321MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123A321MR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, XC6123A321MR-G is a compact voltage regulator with excellent efficiency and protection features. Its wide range of applications makes it a versatile choice for various electronic devices.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6123A321MR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6123A321MR-G in technical solutions:

  1. Question: What is the XC6123A321MR-G?
    Answer: The XC6123A321MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123A321MR-G?
    Answer: The operating voltage range of XC6123A321MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123A321MR-G help in technical solutions?
    Answer: XC6123A321MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6123A321MR-G?
    Answer: The XC6123A321MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6123A321MR-G?
    Answer: The typical reset threshold voltage of XC6123A321MR-G is 3.2V.

  6. Question: Can XC6123A321MR-G be used in battery-powered applications?
    Answer: Yes, XC6123A321MR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current (typically around 1µA).

  7. Question: Does XC6123A321MR-G have any built-in delay for the reset signal?
    Answer: Yes, XC6123A321MR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: Can XC6123A321MR-G be used in automotive applications?
    Answer: Yes, XC6123A321MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Question: What is the package type of XC6123A321MR-G?
    Answer: XC6123A321MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained designs.

  10. Question: Is XC6123A321MR-G RoHS compliant?
    Answer: Yes, XC6123A321MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that these answers are based on general information and it's always recommended to refer to the datasheet or consult the manufacturer for specific details and application requirements.