Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6124A519ER-G
Lihat Butiran Helaian data

XC6124A519ER-G

Product Overview

Category

XC6124A519ER-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • High precision voltage regulation
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection

Package

XC6124A519ER-G comes in a small SOT-23-5 package.

Essence

The essence of XC6124A519ER-G is to provide stable and regulated voltage for electronic devices.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Dropout Voltage: 200mV @ 100mA
  • Quiescent Current: 30µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A519ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. NC (No Connection)
  4. VOUT (Output Voltage)
  5. EN (Enable)

Functional Features

  • High accuracy voltage regulation
  • Low power consumption
  • Overcurrent protection
  • Thermal shutdown protection
  • Fast transient response

Advantages

  • Small package size
  • Wide input voltage range
  • Low dropout voltage
  • Excellent line and load regulation
  • Stable output voltage under varying conditions

Disadvantages

  • Limited output current capability
  • Requires external capacitors for stability
  • Not suitable for high-power applications

Working Principles

XC6124A519ER-G is a linear voltage regulator that uses a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6124A519ER-G is commonly used in various electronic devices, including:

  1. Battery-powered devices
  2. Portable consumer electronics
  3. IoT devices
  4. Wearable devices
  5. Medical equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124A519ER-G are:

  1. LM1117-1.8V
  2. LT1763-1.8
  3. MCP1700-1802E/TO

These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.

In conclusion, XC6124A519ER-G is a voltage regulator with high precision and low dropout voltage. It provides stable voltage regulation for various electronic devices. While it has limitations in terms of output current capability and external component requirements, it offers advantages such as small package size and wide input voltage range. Its working principle involves feedback control to maintain a constant output voltage. It finds applications in battery-powered devices, portable electronics, IoT devices, wearable devices, and medical equipment. Alternative models like LM1117-1.8V, LT1763-1.8, and MCP1700-1802E/TO can also be considered based on specific needs.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6124A519ER-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6124A519ER-G in technical solutions:

  1. Q: What is the XC6124A519ER-G? A: The XC6124A519ER-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.

  2. Q: What is the operating voltage range of XC6124A519ER-G? A: The operating voltage range of XC6124A519ER-G is typically between 0.8V and 6.0V.

  3. Q: How does XC6124A519ER-G help in technical solutions? A: XC6124A519ER-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes out of the desired range.

  4. Q: What is the output type of XC6124A519ER-G? A: The XC6124A519ER-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  5. Q: Can XC6124A519ER-G be used in battery-powered applications? A: Yes, XC6124A519ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Q: What is the typical accuracy of XC6124A519ER-G? A: The typical accuracy of XC6124A519ER-G is ±1.0% at room temperature.

  7. Q: Does XC6124A519ER-G have built-in hysteresis? A: Yes, XC6124A519ER-G has built-in hysteresis of typically 100mV, which helps to prevent oscillation or false triggering near the threshold voltage.

  8. Q: Can XC6124A519ER-G be used in automotive applications? A: Yes, XC6124A519ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the package type of XC6124A519ER-G? A: XC6124A519ER-G is available in a SOT-25 package, which is a small surface-mount package with three pins.

  10. Q: Is XC6124A519ER-G RoHS compliant? A: Yes, XC6124A519ER-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6124A519ER-G.