Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6124C325ER-G

XC6124C325ER-G

Product Overview

Category

XC6124C325ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6124C325ER-G comes in a small SOT-25 package.
  • Essence: This voltage regulator is designed to provide stable and regulated output voltage.
  • Packaging/Quantity: It is typically available in reels or tubes, with a quantity of 3000 units per reel.

Specifications

The specifications of XC6124C325ER-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124C325ER-G has three pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

The functional features of XC6124C325ER-G include:

  • Low dropout voltage: The regulator can operate with a very low input-output voltage differential.
  • Low quiescent current: It consumes minimal current when there is no load.
  • Overcurrent protection: It has built-in protection against excessive output current.
  • Thermal shutdown: The regulator shuts down automatically if the temperature exceeds the specified limit.

Advantages and Disadvantages

Advantages: - Small package size allows for space-saving designs. - Low dropout voltage enables efficient power conversion. - Overcurrent protection ensures the safety of connected devices.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Operating temperature range may restrict usage in extreme environments.

Working Principles

The XC6124C325ER-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It compares the reference voltage with the feedback voltage and adjusts the pass transistor accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6124C325ER-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to XC6124C325ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing alternatives for different design requirements.

In conclusion, XC6124C325ER-G is a voltage regulator that offers stable and regulated output voltage. Its small package size, low dropout voltage, and overcurrent protection make it suitable for various electronic applications. However, its limited output current and operating temperature range should be considered when selecting an alternative model.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6124C325ER-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6124C325ER-G in technical solutions:

  1. Question: What is XC6124C325ER-G?
    - Answer: XC6124C325ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124C325ER-G?
    - Answer: The operating voltage range of XC6124C325ER-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6124C325ER-G?
    - Answer: XC6124C325ER-G has an open-drain output type.

  4. Question: What is the typical quiescent current consumption of XC6124C325ER-G?
    - Answer: The typical quiescent current consumption of XC6124C325ER-G is 1.0µA.

  5. Question: Can XC6124C325ER-G be used for overvoltage detection?
    - Answer: No, XC6124C325ER-G is specifically designed for undervoltage detection only.

  6. Question: What is the hysteresis voltage of XC6124C325ER-G?
    - Answer: The hysteresis voltage of XC6124C325ER-G is typically 50mV.

  7. Question: What is the maximum reset delay time of XC6124C325ER-G?
    - Answer: The maximum reset delay time of XC6124C325ER-G is typically 200ms.

  8. Question: Can XC6124C325ER-G be used in automotive applications?
    - Answer: Yes, XC6124C325ER-G is AEC-Q100 qualified and can be used in automotive applications.

  9. Question: What is the temperature range for operation of XC6124C325ER-G?
    - Answer: XC6124C325ER-G can operate within a temperature range of -40°C to +85°C.

  10. Question: Is XC6124C325ER-G available in a SOT-23 package?
    - Answer: Yes, XC6124C325ER-G is available in a SOT-23-5 package.

Please note that these answers are based on general information about XC6124C325ER-G. For specific technical details and application requirements, it is recommended to refer to the datasheet provided by Torex Semiconductor or consult with their technical support team.