Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6124C428MR-G
Lihat Butiran Helaian data

XC6124C428MR-G

Product Overview

Category

XC6124C428MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6124C428MR-G is available in a small surface-mount package.

Essence

The essence of XC6124C428MR-G lies in its ability to provide stable voltage output for various electronic devices.

Packaging/Quantity

XC6124C428MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: 150mA (maximum)
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C428MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6124C428MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Low power consumption helps conserve energy.
  • High efficiency minimizes power loss during voltage regulation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6124C428MR-G operates based on the principle of feedback control. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6124C428MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C428MR-G are: - LM317T - LT1086 - LM7805 - LM1117

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6124C428MR-G is a voltage regulator that provides stable voltage output for electronic devices. Its compact size, low power consumption, and high efficiency make it suitable for various applications. However, its limited output current and narrow input voltage range should be taken into consideration when selecting an alternative model.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6124C428MR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6124C428MR-G in technical solutions:

  1. Question: What is XC6124C428MR-G?
    Answer: XC6124C428MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124C428MR-G?
    Answer: The operating voltage range of XC6124C428MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124C428MR-G help in technical solutions?
    Answer: XC6124C428MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper initialization and prevents data corruption.

  4. Question: What is the output type of XC6124C428MR-G?
    Answer: XC6124C428MR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.

  5. Question: What is the typical reset threshold voltage of XC6124C428MR-G?
    Answer: The typical reset threshold voltage of XC6124C428MR-G is 4.28V.

  6. Question: Can XC6124C428MR-G be used in battery-powered applications?
    Answer: Yes, XC6124C428MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  7. Question: Does XC6124C428MR-G have any built-in delay time for the reset signal?
    Answer: Yes, XC6124C428MR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: Can XC6124C428MR-G be used in automotive applications?
    Answer: Yes, XC6124C428MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Question: What is the package type of XC6124C428MR-G?
    Answer: XC6124C428MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

  10. Question: Is XC6124C428MR-G RoHS compliant?
    Answer: Yes, XC6124C428MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications for XC6124C428MR-G.