Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6124D516ER-G
Lihat Butiran Helaian data

XC6124D516ER-G

Product Overview

Category

XC6124D516ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124D516ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124D516ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6124D516ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (at 100mA)
  • Quiescent Current: 30µA (typical)

Detailed Pin Configuration

XC6124D516ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6124D516ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current in case of excessive load.
  • Thermal shutdown protection: The device automatically shuts down if the temperature exceeds a certain threshold, preventing damage due to overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range makes it compatible with various power sources.
  • Overcurrent and thermal shutdown protection enhance circuit reliability.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

XC6124D516ER-G operates based on a feedback mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through a combination of voltage regulation, current limiting, and thermal protection mechanisms.

Detailed Application Field Plans

XC6124D516ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D516ER-G are: - LM1117-3.3V - MCP1700-3302E/TO - TS2940CP5

These models offer similar functionality and can be used as replacements depending on specific requirements.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6124D516ER-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6124D516ER-G in technical solutions:

  1. Question: What is XC6124D516ER-G?
    - Answer: XC6124D516ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124D516ER-G?
    - Answer: The operating voltage range of XC6124D516ER-G is from 0.8V to 6.0V.

  3. Question: How does XC6124D516ER-G detect voltage levels?
    - Answer: XC6124D516ER-G detects voltage levels by comparing the input voltage with a fixed reference voltage internally.

  4. Question: What is the output configuration of XC6124D516ER-G?
    - Answer: XC6124D516ER-G has an open-drain output configuration, which means it can be connected to other devices through a pull-up resistor.

  5. Question: What is the typical quiescent current consumption of XC6124D516ER-G?
    - Answer: The typical quiescent current consumption of XC6124D516ER-G is very low, typically around 1.0µA.

  6. Question: Can XC6124D516ER-G operate in both active-high and active-low modes?
    - Answer: Yes, XC6124D516ER-G can be configured to operate in either active-high or active-low mode based on the external connection.

  7. Question: What is the hysteresis voltage of XC6124D516ER-G?
    - Answer: The hysteresis voltage of XC6124D516ER-G is typically 0.1V, which helps to prevent output oscillation near the threshold voltage.

  8. Question: Can XC6124D516ER-G tolerate reverse polarity?
    - Answer: No, XC6124D516ER-G is not designed to tolerate reverse polarity. It should be connected with the correct polarity to avoid damage.

  9. Question: What is the temperature range for operation of XC6124D516ER-G?
    - Answer: XC6124D516ER-G can operate within a temperature range of -40°C to +85°C.

  10. Question: What are some typical applications of XC6124D516ER-G?
    - Answer: XC6124D516ER-G is commonly used in various technical solutions such as battery-powered devices, portable electronics, industrial equipment, automotive systems, and more, where accurate monitoring of power supply voltages is required.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.