Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6124E521MR-G
Lihat Butiran Helaian data

XC6124E521MR-G

Product Overview

Category

XC6124E521MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6124E521MR-G is available in a small surface-mount package.

Essence

The essence of XC6124E521MR-G lies in its ability to regulate voltage effectively and efficiently.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E521MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6124E521MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive temperature, the device shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6124E521MR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output voltage within the specified range.

Detailed Application Field Plans

XC6124E521MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124E521MR-G are: - XC6201P182MR - XC6220B331MR - XC6219B332MR - XC6221C502MR

These models provide comparable voltage regulation capabilities and can be considered as alternatives based on specific requirements.

Word count: 314 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6124E521MR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6124E521MR-G in technical solutions:

  1. Question: What is XC6124E521MR-G?
    - Answer: XC6124E521MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6124E521MR-G?
    - Answer: The operating voltage range of XC6124E521MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124E521MR-G detect the voltage level?
    - Answer: XC6124E521MR-G uses a built-in voltage reference and comparator to compare the input voltage with a preset threshold. When the input voltage drops below the threshold, it triggers an output signal.

  4. Question: What is the output type of XC6124E521MR-G?
    - Answer: XC6124E521MR-G has an open-drain output, which means it can sink current but cannot source current. It requires an external pull-up resistor to provide a logic-level output.

  5. Question: What is the typical quiescent current consumption of XC6124E521MR-G?
    - Answer: The typical quiescent current consumption of XC6124E521MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6124E521MR-G be used for undervoltage detection in battery-powered applications?
    - Answer: Yes, XC6124E521MR-G is commonly used for undervoltage detection in battery-powered applications due to its low quiescent current and wide operating voltage range.

  7. Question: What is the hysteresis feature of XC6124E521MR-G?
    - Answer: XC6124E521MR-G has a built-in hysteresis feature, which prevents the output from oscillating when the input voltage is near the threshold level. It ensures a stable output signal.

  8. Question: Can XC6124E521MR-G be used in automotive applications?
    - Answer: Yes, XC6124E521MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: Does XC6124E521MR-G have any built-in protection features?
    - Answer: Yes, XC6124E521MR-G includes built-in overcurrent protection and thermal shutdown features to protect the IC from damage under fault conditions.

  10. Question: What is the package type of XC6124E521MR-G?
    - Answer: XC6124E521MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.