Torex Semiconductor Ltd
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
XC6124E748MR-G
Lihat Butiran Helaian data

XC6124E748MR-G

Product Overview

Category

XC6124E748MR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation
  • Stabilization of voltage levels
  • Compact size
  • High efficiency

Package

XC6124E748MR-G comes in a small surface-mount package.

Essence

The essence of XC6124E748MR-G is to provide a stable and regulated voltage output for electronic devices.

Packaging/Quantity

XC6124E748MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124E748MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small size allows for space-saving designs
  • High efficiency results in less power dissipation
  • Wide input voltage range provides flexibility in various applications
  • Built-in protection features enhance reliability

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications
  • Dropout voltage may affect performance in low input voltage scenarios

Working Principles

XC6124E748MR-G operates by comparing the output voltage with a reference voltage. It adjusts the internal circuitry to maintain a stable output voltage, regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6124E748MR-G finds applications in various electronic devices and systems, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124E748MR-G are: - LM1117-3.3 - LT1763-3.3 - MCP1700-3302E

These models offer similar functionality and specifications, providing options for different design requirements.

Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi XC6124E748MR-G dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of XC6124E748MR-G in technical solutions:

  1. Question: What is XC6124E748MR-G?
    Answer: XC6124E748MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124E748MR-G?
    Answer: The operating voltage range of XC6124E748MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124E748MR-G help in technical solutions?
    Answer: XC6124E748MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.

  4. Question: What is the output type of XC6124E748MR-G?
    Answer: XC6124E748MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6124E748MR-G?
    Answer: The typical reset threshold voltage of XC6124E748MR-G is 2.93V.

  6. Question: Can XC6124E748MR-G be used in battery-powered applications?
    Answer: Yes, XC6124E748MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  7. Question: Does XC6124E748MR-G have any built-in delay time?
    Answer: Yes, XC6124E748MR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: What is the maximum operating temperature range of XC6124E748MR-G?
    Answer: The maximum operating temperature range of XC6124E748MR-G is -40°C to +85°C.

  9. Question: Can XC6124E748MR-G be used in automotive applications?
    Answer: Yes, XC6124E748MR-G is AEC-Q100 qualified and can be used in automotive applications where reliable voltage monitoring and reset functionality are required.

  10. Question: Is XC6124E748MR-G available in different package options?
    Answer: Yes, XC6124E748MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained applications.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.