Toshiba Semiconductor and Storage
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TB67S149FTG,EL
Lihat Butiran Helaian data

TB67S149FTG,EL

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor Driver
  • Characteristics: High-performance, compact size, efficient power management
  • Package: QFN (Quad Flat No-leads)
  • Essence: This IC is designed to control and drive motors efficiently.
  • Packaging/Quantity: Available in reels of 2500 pieces.

Specifications

  • Operating Voltage: 2.5V - 16V
  • Output Current: Up to 3A per channel
  • Number of Channels: Dual-channel
  • Control Interface: PWM (Pulse Width Modulation)
  • Protection Features: Overcurrent protection, thermal shutdown, undervoltage lockout

Detailed Pin Configuration

The TB67S149FTG,EL IC has the following pin configuration:

  1. VCC1: Power supply for logic circuitry (2.5V - 5.5V)
  2. GND1: Ground for logic circuitry
  3. IN1: Input signal for Channel 1
  4. OUT1: Output signal for Channel 1
  5. VREF1: Reference voltage for Channel 1
  6. VCC2: Power supply for motor driver (8V - 16V)
  7. GND2: Ground for motor driver
  8. IN2: Input signal for Channel 2
  9. OUT2: Output signal for Channel 2
  10. VREF2: Reference voltage for Channel 2
  11. STBY: Standby control input
  12. MODE: Mode selection input
  13. SLP: Sleep mode control input
  14. FAULT: Fault detection output
  15. VCP: Charge pump capacitor connection
  16. CP1: Charge pump terminal 1
  17. CP2: Charge pump terminal 2
  18. VREG: Internal voltage regulator output
  19. VM: Motor power supply
  20. GND3: Ground for motor power supply

Functional Features

  • High Efficiency: The TB67S149FTG,EL IC utilizes advanced power management techniques to maximize motor efficiency.
  • Compact Size: Its QFN package allows for a compact and space-saving design.
  • Overcurrent Protection: The IC includes built-in overcurrent protection to prevent damage to the motor or the driver circuitry.
  • Thermal Shutdown: It features a thermal shutdown mechanism that protects against overheating.
  • Undervoltage Lockout: The undervoltage lockout feature ensures proper operation even at low voltage levels.

Advantages and Disadvantages

Advantages: - High-performance motor control - Efficient power management - Compact size for space-constrained applications - Built-in protection features

Disadvantages: - Limited output current (up to 3A per channel) - Requires external components for full functionality

Working Principles

The TB67S149FTG,EL IC operates by receiving PWM signals from a microcontroller or other control circuitry. These signals control the speed and direction of the connected motor. The IC amplifies and drives the motor with the appropriate voltage and current levels. It also incorporates various protection mechanisms to ensure safe and reliable operation.

Detailed Application Field Plans

The TB67S149FTG,EL IC finds applications in various fields, including:

  1. Robotics: It can be used to drive motors in robotic systems, enabling precise control and movement.
  2. Industrial Automation: The IC is suitable for motor control in industrial automation equipment, such as conveyor belts and assembly lines.
  3. Automotive: It can be utilized in automotive applications, such as electric power steering systems or window control mechanisms.
  4. Consumer Electronics: The IC can be integrated into consumer electronic devices that require motor control, such as drones or camera gimbals.

Detailed and Complete Alternative Models

  1. TB67S249FTG,EL: Similar to TB67S149FTG,EL but with higher output current capability (up to 5A per channel).
  2. TB67S329FTG,EL: Offers additional features like stall detection and automatic current reduction.
  3. TB67S109FTG,EL: Lower-cost alternative with reduced functionality (up to 2A per channel).

These alternative models provide options based on specific application requirements and budget considerations.

Word count: 533 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TB67S149FTG,EL dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of TB67S149FTG,EL in technical solutions:

  1. Q: What is TB67S149FTG,EL? A: TB67S149FTG,EL is a motor driver IC (integrated circuit) designed for controlling stepper motors or brushed DC motors.

  2. Q: What voltage range does TB67S149FTG,EL support? A: TB67S149FTG,EL supports a wide voltage range from 4.5V to 44V.

  3. Q: Can TB67S149FTG,EL drive both bipolar and unipolar stepper motors? A: Yes, TB67S149FTG,EL can drive both bipolar and unipolar stepper motors.

  4. Q: What is the maximum current that TB67S149FTG,EL can deliver? A: TB67S149FTG,EL can deliver a maximum current of up to 3A per channel.

  5. Q: Does TB67S149FTG,EL have built-in protection features? A: Yes, TB67S149FTG,EL has various built-in protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  6. Q: Can TB67S149FTG,EL be controlled using a microcontroller? A: Yes, TB67S149FTG,EL can be easily controlled using a microcontroller through its step and direction inputs.

  7. Q: Is TB67S149FTG,EL compatible with Arduino boards? A: Yes, TB67S149FTG,EL is compatible with Arduino boards and can be used in various Arduino projects.

  8. Q: Can TB67S149FTG,EL be used in battery-powered applications? A: Yes, TB67S149FTG,EL can be used in battery-powered applications as it supports a wide voltage range and has low power consumption.

  9. Q: Does TB67S149FTG,EL require any external components for operation? A: Yes, TB67S149FTG,EL requires external components such as capacitors, resistors, and diodes for proper operation.

  10. Q: Where can I find the datasheet and application notes for TB67S149FTG,EL? A: The datasheet and application notes for TB67S149FTG,EL can be found on the manufacturer's website or through online electronic component distributors.