Vishay BC Components
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
NTCLE100CL682JB0
Lihat Butiran Helaian data

NTCLE100CL682JB0

Product Overview

NTCLE100CL682JB0 belongs to the category of NTC thermistors. These are temperature-sensitive resistors that exhibit a decrease in resistance with an increase in temperature. The NTCLE100CL682JB0 is commonly used for temperature sensing and compensation in various electronic devices. Its characteristics include high sensitivity, small size, and fast response time. It is typically packaged in a small epoxy bead and is available in various quantities.

Specifications

  • Resistance at 25°C: 6.8 kΩ
  • Tolerance: ±5%
  • Maximum Power Rating: 125 mW
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The NTCLE100CL682JB0 has two leads, with the resistor element encapsulated within an epoxy bead. The pin configuration is as follows: 1. Lead 1: Connected to one end of the resistor element 2. Lead 2: Connected to the other end of the resistor element

Functional Features

  • High sensitivity to temperature changes
  • Fast response time
  • Wide operating temperature range
  • Small size for easy integration into electronic circuits

Advantages and Disadvantages

Advantages

  • High sensitivity enables precise temperature measurement
  • Fast response time allows for quick thermal analysis
  • Small size facilitates integration into compact designs

Disadvantages

  • Limited accuracy compared to other temperature sensing technologies
  • Susceptible to self-heating effects at higher currents

Working Principles

The NTCLE100CL682JB0 operates based on the principle of negative temperature coefficient (NTC) thermistors. As the temperature increases, the resistance of the thermistor decreases exponentially. This characteristic makes it suitable for temperature measurement and compensation in electronic circuits.

Application Field Plans

The NTCLE100CL682JB0 finds extensive use in various applications, including: - Temperature sensing in consumer electronics - Thermal management in automotive systems - Temperature compensation in industrial control systems - Medical devices for temperature monitoring

Alternative Models

Some alternative models to NTCLE100CL682JB0 include: - NTCLE100E3103JB0: Similar characteristics with a different resistance value - NTCLE100E3473JB0: Higher resistance variant for specific applications - NTCLE100E3104JB0: Lower resistance variant suitable for different temperature ranges

In conclusion, the NTCLE100CL682JB0 NTC thermistor offers high sensitivity and fast response time, making it a versatile component for temperature sensing and compensation in various electronic applications.

(Word count: 342)

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi NTCLE100CL682JB0 dalam penyelesaian teknikal

  1. What is the NTCLE100CL682JB0 used for?

    • The NTCLE100CL682JB0 is a thermistor commonly used for temperature sensing and control in various technical solutions.

  2. What is the temperature range of NTCLE100CL682JB0?

    • The NTCLE100CL682JB0 has a temperature range of -40°C to 125°C, making it suitable for a wide range of applications.

  3. How does NTCLE100CL682JB0 work as a temperature sensor?

    • The NTCLE100CL682JB0 operates based on the principle of resistance change with temperature, providing an output voltage proportional to the temperature.

  4. What are the typical applications of NTCLE100CL682JB0?

    • Typical applications include temperature monitoring and control in consumer electronics, automotive systems, industrial equipment, and HVAC systems.

  5. What is the accuracy of NTCLE100CL682JB0?

    • The NTCLE100CL682JB0 offers high accuracy in temperature measurement, typically within ±1°C.

  6. Can NTCLE100CL682JB0 be used in harsh environments?

    • Yes, the NTCLE100CL682JB0 is designed to withstand harsh environmental conditions, making it suitable for rugged applications.

  7. How is NTCLE100CL682JB0 interfaced with microcontrollers or control systems?

    • The NTCLE100CL682JB0 can be easily interfaced with microcontrollers or control systems using analog input channels or dedicated temperature sensing circuits.

  8. Does NTCLE100CL682JB0 require calibration?

    • The NTCLE100CL682JB0 may require initial calibration to ensure accurate temperature measurements, especially in critical applications.

  9. What are the key advantages of using NTCLE100CL682JB0 over other temperature sensors?

    • The NTCLE100CL682JB0 offers high sensitivity, fast response time, and a wide operating temperature range compared to many other temperature sensors.

  10. Are there any specific precautions to consider when using NTCLE100CL682JB0 in technical solutions?

    • It's important to consider factors such as self-heating effects, thermal dissipation, and proper mounting techniques to optimize the performance of NTCLE100CL682JB0 in technical solutions.