Vishay BC Components
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
NTCLE100E3104JT1
Lihat Butiran Helaian data

NTCLE100E3104JT1

Product Overview

NTCLE100E3104JT1 belongs to the category of NTC thermistors and is commonly used for temperature sensing and compensation in various electronic devices. These thermistors are known for their high sensitivity to temperature changes, making them suitable for a wide range of applications. The NTCLE100E3104JT1 thermistor exhibits characteristics such as high accuracy, fast response time, and a compact package, making it an essential component in temperature control systems. It is typically available in bulk packaging with varying quantities to suit different production needs.

Specifications

  • Resistance at 25°C: 100 kΩ
  • Tolerance: ±5%
  • Operating Temperature Range: -55°C to 150°C
  • Thermal Time Constant: 7 seconds (in still air)
  • Maximum Power Rating: 125 mW

Detailed Pin Configuration

The NTCLE100E3104JT1 thermistor has two leads, with one lead connected to each end of the thermistor element. The pin configuration is as follows: - Pin 1: Connected to one end of the thermistor element - Pin 2: Connected to the other end of the thermistor element

Functional Features

  • High sensitivity to temperature changes
  • Wide operating temperature range
  • Fast response time
  • Accurate temperature measurement and compensation

Advantages and Disadvantages

Advantages

  • High accuracy in temperature sensing
  • Compact size for easy integration into electronic circuits
  • Suitable for a wide range of temperature compensation applications

Disadvantages

  • Limited tolerance of ±5% may require additional calibration in some precision applications
  • Sensitivity to environmental factors such as humidity and vibration

Working Principles

The NTCLE100E3104JT1 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This characteristic allows it to be used effectively in temperature measurement and compensation circuits.

Detailed Application Field Plans

The NTCLE100E3104JT1 thermistor finds extensive use in various applications, including but not limited to: - Temperature sensors in automotive systems - Thermal management in consumer electronics - Industrial process control and monitoring - Medical devices for temperature measurement

Detailed and Complete Alternative Models

Some alternative models to NTCLE100E3104JT1 include: - NTCLE100E3103JT1: Similar specifications with a slightly lower resistance at 25°C - NTCLE100E3105JT1: Similar specifications with a slightly higher resistance at 25°C - NTCLE100E3473JT1: Higher resistance variant for specific temperature compensation requirements

In conclusion, the NTCLE100E3104JT1 NTC thermistor offers high-performance temperature sensing and compensation capabilities, making it a versatile component in various electronic systems.

Word count: 411

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi NTCLE100E3104JT1 dalam penyelesaian teknikal

  1. What is the NTCLE100E3104JT1 used for?

    • The NTCLE100E3104JT1 is a thermistor commonly used for temperature sensing and compensation in various technical solutions.

  2. What is the operating temperature range of NTCLE100E3104JT1?

    • The operating temperature range of NTCLE100E3104JT1 is typically -55°C to 150°C, making it suitable for a wide range of applications.

  3. How does NTCLE100E3104JT1 work as a temperature sensor?

    • NTCLE100E3104JT1 operates based on the principle of resistance change with temperature. As the temperature increases, the resistance decreases, allowing it to be used as a temperature sensor.

  4. What are the typical applications of NTCLE100E3104JT1?

    • NTCLE100E3104JT1 is commonly used in automotive systems, consumer electronics, industrial equipment, and HVAC systems for temperature measurement and compensation.

  5. What is the resistance value of NTCLE100E3104JT1 at 25°C?

    • The resistance value of NTCLE100E3104JT1 at 25°C is 100 kΩ, which is a standard value for NTC thermistors.

  6. Can NTCLE100E3104JT1 be used for temperature compensation in electronic circuits?

    • Yes, NTCLE100E3104JT1 can be used for temperature compensation in electronic circuits to maintain stable performance over a range of temperatures.

  7. Is NTCLE100E3104JT1 suitable for battery temperature monitoring?

    • Yes, NTCLE100E3104JT1 is suitable for battery temperature monitoring in applications such as electric vehicles and energy storage systems.

  8. What are the advantages of using NTCLE100E3104JT1 in technical solutions?

    • Some advantages include high sensitivity to temperature changes, small size, and compatibility with automated assembly processes.

  9. Are there any precautions to consider when using NTCLE100E3104JT1?

    • It's important to avoid exceeding the maximum power rating and ensure proper thermal management to prevent self-heating effects.

  10. Where can I find detailed specifications and application notes for NTCLE100E3104JT1?

    • Detailed specifications and application notes for NTCLE100E3104JT1 can be found in the datasheet provided by the manufacturer or distributor.