NTCLE213E3103HLT1
Product Overview
Category
The NTCLE213E3103HLT1 belongs to the category of NTC thermistors.
Use
It is commonly used for temperature sensing and control applications.
Characteristics
- High sensitivity to temperature changes
- Small size
- Wide operating temperature range
- Accurate and reliable temperature measurement
Package
The NTCLE213E3103HLT1 is typically available in a small surface-mount package.
Essence
The essence of this product lies in its ability to accurately measure and respond to changes in temperature, making it suitable for various electronic devices and systems.
Packaging/Quantity
It is usually supplied in reels with a specific quantity per reel, varying based on manufacturer specifications.
Specifications
- Resistance at 25°C: 10 kΩ ± 3%
- Operating Temperature Range: -40°C to 125°C
- Thermal Time Constant: 7 seconds (in still air)
- Maximum Power Rating: 50 mW
Detailed Pin Configuration
The NTCLE213E3103HLT1 typically has two pins for connection. The pinout configuration is as follows: - Pin 1: Connection point for one end of the thermistor - Pin 2: Connection point for the other end of the thermistor
Functional Features
- Temperature-dependent resistance
- High sensitivity to temperature changes
- Stable and reliable performance over a wide temperature range
Advantages and Disadvantages
Advantages
- High sensitivity
- Wide operating temperature range
- Small form factor
- Reliable and accurate temperature measurement
Disadvantages
- Non-linear response to temperature changes
- Requires calibration for precise measurements in certain applications
Working Principles
The NTCLE213E3103HLT1 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This characteristic allows it to be used for temperature sensing and control in various electronic systems.
Detailed Application Field Plans
The NTCLE213E3103HLT1 finds extensive use in the following application fields: - Temperature monitoring and control in consumer electronics - Thermal management in automotive systems - Industrial process control and monitoring - Medical devices for temperature measurement and regulation
Detailed and Complete Alternative Models
Some alternative models to the NTCLE213E3103HLT1 include: - NTCLE100E3103JB0: Similar characteristics and package, with slightly different resistance values - NTCLE203E3103SB0: Surface-mount NTC thermistor with comparable specifications and performance
In conclusion, the NTCLE213E3103HLT1 NTC thermistor offers high sensitivity and reliable temperature measurement capabilities, making it a valuable component in various electronic systems and devices.
[Word Count: 411]
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi NTCLE213E3103HLT1 dalam penyelesaian teknikal
What is the NTCLE213E3103HLT1?
- The NTCLE213E3103HLT1 is a thermistor, specifically an NTC (Negative Temperature Coefficient) thermistor, which means its resistance decreases as temperature increases.
What are the typical applications of NTCLE213E3103HLT1?
- The NTCLE213E3103HLT1 is commonly used in temperature sensing and compensation, inrush current limiting, and temperature control circuits.
What is the temperature range for NTCLE213E3103HLT1?
- The NTCLE213E3103HLT1 has a temperature range of -40°C to 125°C, making it suitable for a wide range of environmental conditions.
How does NTCLE213E3103HLT1 work in temperature sensing?
- The NTCLE213E3103HLT1's resistance changes with temperature, allowing it to be used as a sensor to measure temperature changes in a circuit.
Can NTCLE213E3103HLT1 be used for inrush current limiting?
- Yes, the NTCLE213E3103HLT1 can be used to limit inrush current in power supply circuits by temporarily increasing its resistance during power-up.
What are the key electrical characteristics of NTCLE213E3103HLT1?
- The key electrical characteristics include its resistance at 25°C, beta value, maximum power rating, and thermal time constant.
How can NTCLE213E3103HLT1 be integrated into a temperature control circuit?
- NTCLE213E3103HLT1 can be used in conjunction with other components such as op-amps and microcontrollers to create a feedback loop for precise temperature control.
Are there any precautions to consider when using NTCLE213E3103HLT1 in technical solutions?
- It's important to consider self-heating effects, mounting considerations, and calibration requirements when integrating NTCLE213E3103HLT1 into a design.
What are the advantages of using NTCLE213E3103HLT1 over other temperature sensors?
- NTCLE213E3103HLT1 offers high sensitivity, fast response times, and a wide operating temperature range, making it suitable for various technical solutions.
Where can I find detailed specifications and application notes for NTCLE213E3103HLT1?
- Detailed specifications and application notes for NTCLE213E3103HLT1 can be found in the datasheet provided by the manufacturer or on their official website.