Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
3N248-E4/51
Lihat Butiran Helaian data

3N248-E4/51 Product Overview

Introduction

The 3N248-E4/51 is a semiconductor device belonging to the category of power transistors. This product is widely used in electronic circuits for amplification and switching applications due to its unique characteristics.

Basic Information Overview

  • Category: Power Transistor
  • Use: Amplification and Switching
  • Characteristics: High voltage capability, low saturation voltage, high current gain
  • Package: TO-220
  • Essence: Efficient power handling
  • Packaging/Quantity: Typically sold in reels or tubes

Specifications

  • Voltage Rating: 100V
  • Current Rating: 10A
  • Power Dissipation: 50W
  • Frequency: Up to 100MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The 3N248-E4/51 features a standard TO-220 pin configuration with three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High voltage capability allows for use in various power applications
  • Low saturation voltage ensures minimal power loss during operation
  • High current gain enables efficient signal amplification

Advantages and Disadvantages

Advantages

  • Suitable for high-power applications
  • Low power dissipation
  • Wide operating temperature range

Disadvantages

  • Limited frequency response compared to specialized RF transistors
  • Relatively larger package size compared to SMD alternatives

Working Principles

The 3N248-E4/51 operates based on the principles of bipolar junction transistors, utilizing the control of current flow between the collector and emitter terminals through the base terminal.

Detailed Application Field Plans

This power transistor finds extensive use in the following applications: - Audio amplifiers - Power supplies - Motor control circuits - Voltage regulators

Detailed and Complete Alternative Models

For those seeking alternative models, the following options are available: - 2N3055 - TIP31C - MJ15003

In conclusion, the 3N248-E4/51 power transistor offers high voltage capability, low saturation voltage, and high current gain, making it suitable for various power applications such as audio amplifiers, power supplies, and motor control circuits.

[Word Count: 314]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 3N248-E4/51 dalam penyelesaian teknikal

  1. What is the 3N248-E4/51 component used for in technical solutions?

    • The 3N248-E4/51 is a high-frequency N-channel MOSFET transistor commonly used in RF amplifier and switching applications.

  2. What are the key specifications of the 3N248-E4/51?

    • The 3N248-E4/51 typically has a voltage rating of 30V, a current rating of 100mA, and a power dissipation of 350mW.

  3. How is the 3N248-E4/51 typically connected in a circuit?

    • The 3N248-E4/51 is often used as a switch or amplifier in RF circuits and is connected according to its datasheet specifications, typically using appropriate biasing and matching networks.

  4. What are the typical applications of the 3N248-E4/51 in technical solutions?

    • The 3N248-E4/51 is commonly used in RF amplifiers, RF switches, and other high-frequency applications due to its low capacitance and high-speed switching capabilities.

  5. What are the operating temperature ranges for the 3N248-E4/51?

    • The 3N248-E4/51 typically operates within a temperature range of -55°C to +150°C, making it suitable for a wide range of environments.

  6. What are the common challenges when using the 3N248-E4/51 in technical solutions?

    • Common challenges include ensuring proper thermal management, impedance matching, and minimizing parasitic capacitances in high-frequency designs.

  7. Are there any recommended companion components or circuits for use with the 3N248-E4/51?

    • Depending on the specific application, matching networks, biasing circuits, and protection diodes may be recommended to optimize the performance and reliability of the 3N248-E4/51.

  8. Can the 3N248-E4/51 be used in low-power applications?

    • Yes, the 3N248-E4/51 can be utilized in low-power RF applications, provided that the operating conditions and circuit design are appropriately configured.

  9. What are the typical packaging options available for the 3N248-E4/51?

    • The 3N248-E4/51 is commonly available in surface-mount packages such as SOT-23, making it suitable for compact and integrated designs.

  10. Where can I find detailed application notes and reference designs for the 3N248-E4/51?

    • Detailed application notes and reference designs for the 3N248-E4/51 can often be found in the manufacturer's datasheet, application guides, or technical support resources.