Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
BZG04-8V2-M3-08
Lihat Butiran Helaian data

BZG04-8V2-M3-08 Encyclopedia Entry

Product Overview

The BZG04-8V2-M3-08 belongs to the category of voltage regulators and is designed for use in electronic circuits to regulate voltage levels. This component exhibits characteristics such as high precision, low dropout voltage, and thermal shutdown protection. It is typically packaged in a small surface-mount package and is available in quantities suitable for both prototyping and production.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 300mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The BZG04-8V2-M3-08 features a standard 8-pin configuration with clearly labeled input, output, and ground pins. The pinout is as follows: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. NC (No Connection) 5. NC (No Connection) 6. VOUT (Output Voltage) 7. NC (No Connection) 8. EN (Enable)

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation.
  • Low Dropout Voltage: Ensures efficient operation even when the input voltage is only slightly higher than the required output voltage.
  • Thermal Shutdown Protection: Safeguards the regulator from overheating, enhancing its reliability in various operating conditions.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact surface-mount package
  • Wide input voltage range

Disadvantages

  • Limited maximum output current
  • Higher dropout voltage compared to some alternative models

Working Principles

The BZG04-8V2-M3-08 utilizes a feedback control mechanism to maintain a constant output voltage despite variations in the input voltage and load conditions. When the input voltage exceeds the desired output voltage, the regulator reduces the excess voltage to maintain stability.

Detailed Application Field Plans

This voltage regulator is well-suited for applications in portable electronic devices, battery-powered systems, and low-power microcontroller-based designs. Its ability to operate within a wide input voltage range makes it suitable for various battery chemistries and charging circuits.

Detailed and Complete Alternative Models

  • BZG04-5V8-M3-08: Similar voltage regulator with a lower output voltage of 5V
  • BZG04-12V-M3-08: Variant designed for higher input voltages up to 36V

In conclusion, the BZG04-8V2-M3-08 offers precise voltage regulation in a compact package, making it an ideal choice for low-power electronic applications. While it has limitations in terms of maximum output current and dropout voltage, its performance and reliability make it a valuable component in modern electronic designs.

[Word Count: 387]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi BZG04-8V2-M3-08 dalam penyelesaian teknikal

  1. What is BZG04-8V2-M3-08?

    • BZG04-8V2-M3-08 is a specific model of a diode, commonly used in electronic circuits for voltage regulation and protection.

  2. What are the key features of BZG04-8V2-M3-08?

    • The key features include a reverse voltage of 8.2V, a maximum forward current of 400mA, and a small form factor suitable for compact designs.

  3. How is BZG04-8V2-M3-08 typically used in technical solutions?

    • It is commonly used for overvoltage protection, voltage clamping, and transient voltage suppression in various electronic applications.

  4. What are the typical applications for BZG04-8V2-M3-08?

    • Typical applications include power supplies, automotive electronics, consumer electronics, and industrial control systems.

  5. What are the advantages of using BZG04-8V2-M3-08 in technical solutions?

    • Its low leakage current, fast response time, and high surge capability make it ideal for protecting sensitive components from voltage spikes.

  6. Are there any limitations or considerations when using BZG04-8V2-M3-08?

    • Users should be mindful of its maximum forward current and ensure proper heat dissipation in high-power applications.

  7. What are the recommended operating conditions for BZG04-8V2-M3-08?

    • It is typically operated within a temperature range of -55°C to 150°C and with a maximum soldering temperature of 260°C.

  8. Can BZG04-8V2-M3-08 be used in combination with other components?

    • Yes, it can be integrated into circuit designs alongside resistors, capacitors, and other diodes to provide comprehensive protection.

  9. How does BZG04-8V2-M3-08 compare to similar diodes on the market?

    • It offers a balance of performance, size, and cost, making it a competitive choice for many applications.

  10. Where can I find detailed specifications and application notes for BZG04-8V2-M3-08?

    • Detailed specifications and application notes can be found in the product datasheet provided by the manufacturer or distributor.