Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MBRB2060CT-E3/45
Lihat Butiran Helaian data

MBRB2060CT-E3/45

Introduction

The MBRB2060CT-E3/45 is a diode belonging to the category of Schottky Rectifier. This product is widely used in various electronic applications due to its unique characteristics and advantages.

Basic Information Overview

  • Category: Schottky Rectifier
  • Use: Used for rectification in electronic circuits
  • Characteristics: High efficiency, low forward voltage drop, fast switching speed
  • Package: TO-263AB
  • Essence: Efficient rectification in electronic circuits
  • Packaging/Quantity: Available in reels or tubes, quantity varies by manufacturer

Specifications

  • Voltage - DC Reverse (Vr) (Max): 60V
  • Current - Average Rectified (Io): 20A
  • Voltage - Forward (Vf) (Max) @ If: 650mV @ 10A
  • Speed: Fast recovery

Detailed Pin Configuration

The MBRB2060CT-E3/45 typically has three pins: Anode, Cathode, and Gate. The pin configuration is as follows: - Anode (A) - Pin 1 - Cathode (K) - Pin 2 - Gate (G) - Pin 3

Functional Features

  • Fast switching speed
  • Low forward voltage drop
  • High efficiency

Advantages and Disadvantages

Advantages

  • High efficiency
  • Low forward voltage drop
  • Fast switching speed

Disadvantages

  • Higher cost compared to standard rectifiers
  • Sensitive to overvoltage conditions

Working Principles

The MBRB2060CT-E3/45 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes.

Detailed Application Field Plans

The MBRB2060CT-E3/45 is commonly used in the following applications: - Switching power supplies - Voltage clamping - Reverse polarity protection - DC-DC converters

Detailed and Complete Alternative Models

Some alternative models to the MBRB2060CT-E3/45 include: - SS26-E3/61T - SB560-E3/54 - SR560-E3/54

In conclusion, the MBRB2060CT-E3/45 Schottky Rectifier offers high efficiency and fast switching speed, making it suitable for various electronic applications such as switching power supplies and voltage clamping. While it has advantages such as low forward voltage drop, it is important to consider its sensitivity to overvoltage conditions and higher cost compared to standard rectifiers when selecting it for a specific application. Additionally, there are alternative models available that offer similar functionality for consideration in different design scenarios.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MBRB2060CT-E3/45 dalam penyelesaian teknikal

  1. What is the MBRB2060CT-E3/45 used for?

    • The MBRB2060CT-E3/45 is a Schottky diode designed for use in rectification and power supply applications.

  2. What are the key features of the MBRB2060CT-E3/45?

    • The MBRB2060CT-E3/45 features a low forward voltage drop, high current capability, and fast switching speed.

  3. What is the maximum forward voltage of the MBRB2060CT-E3/45?

    • The maximum forward voltage of the MBRB2060CT-E3/45 is typically around 0.65V at a forward current of 10A.

  4. What is the reverse voltage rating of the MBRB2060CT-E3/45?

    • The MBRB2060CT-E3/45 has a reverse voltage rating of 60V.

  5. Can the MBRB2060CT-E3/45 be used in high-frequency applications?

    • Yes, the MBRB2060CT-E3/45 is suitable for high-frequency applications due to its fast switching speed.

  6. What are the typical applications of the MBRB2060CT-E3/45?

    • Typical applications include DC-DC converters, freewheeling diodes, OR-ing diodes, and reverse polarity protection.

  7. Does the MBRB2060CT-E3/45 require a heatsink?

    • The need for a heatsink depends on the specific application and the amount of power dissipation. In high-power applications, a heatsink may be necessary.

  8. Is the MBRB2060CT-E3/45 RoHS compliant?

    • Yes, the MBRB2060CT-E3/45 is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  9. What is the operating temperature range of the MBRB2060CT-E3/45?

    • The MBRB2060CT-E3/45 can operate within a temperature range of -65°C to 175°C.

  10. Are there any recommended layout considerations when using the MBRB2060CT-E3/45?

    • It is recommended to minimize the length of the traces connecting the diode to other components and to provide adequate thermal relief for the diode's mounting pad to ensure proper performance.