Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
P6SMB200A-E3/5B
Lihat Butiran Helaian data

P6SMB200A-E3/5B

Product Overview

Category

The P6SMB200A-E3/5B belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

Characteristics

  • Fast response time
  • Low clamping voltage
  • High surge current capability

Package

The P6SMB200A-E3/5B is available in a DO-214AA (SMB) package.

Essence

The essence of this product lies in its ability to divert excessive current away from sensitive components, thereby safeguarding them from damage.

Packaging/Quantity

The P6SMB200A-E3/5B is typically packaged in reels with quantities varying based on manufacturer specifications.

Specifications

  • Standoff Voltage: 171V to 188V
  • Breakdown Voltage: 190V to 210V
  • Peak Pulse Power: 600W
  • Operating Temperature: -55°C to 150°C

Detailed Pin Configuration

The P6SMB200A-E3/5B has two pins, with the anode connected to the positive side and the cathode connected to the negative side.

Functional Features

  • Bi-directional protection
  • Low clamping voltage
  • High surge current capability

Advantages and Disadvantages

Advantages

  • Provides effective protection against voltage transients
  • Fast response time
  • Can handle high surge currents

Disadvantages

  • May require additional circuitry for comprehensive overvoltage protection

Working Principles

When a voltage transient occurs, the P6SMB200A-E3/5B conducts excess current to the ground, limiting the voltage across the protected circuit.

Detailed Application Field Plans

The P6SMB200A-E3/5B is commonly used in: - Telecommunication equipment - Automotive electronics - Industrial control systems - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the P6SMB200A-E3/5B include: - P6SMB170A-E3/52 - P6SMB220A-E3/52 - P6SMB250A-E3/52

In conclusion, the P6SMB200A-E3/5B is a crucial component in protecting electronic circuits from voltage transients, offering fast response times and high surge current capabilities. Its application spans across various industries, making it an essential part of modern electronic systems.

Word Count: 366

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi P6SMB200A-E3/5B dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of P6SMB200A-E3/5B in technical solutions:

  1. What is the maximum peak pulse power dissipation of P6SMB200A-E3/5B?

    • The maximum peak pulse power dissipation is 600 watts for a 10/1000μs waveform.

  2. What is the breakdown voltage of P6SMB200A-E3/5B?

    • The breakdown voltage is 171V minimum and 189V maximum at 1mA.

  3. What is the typical clamping voltage of P6SMB200A-E3/5B?

    • The typical clamping voltage is 324V at 5.8A.

  4. What is the operating temperature range of P6SMB200A-E3/5B?

    • The operating temperature range is -55°C to +150°C.

  5. What is the package type of P6SMB200A-E3/5B?

    • The package type is DO-214AA (SMB).

  6. What are the typical applications for P6SMB200A-E3/5B?

    • Typical applications include transient voltage suppression for industrial and consumer electronic equipment.

  7. What is the reverse stand-off voltage of P6SMB200A-E3/5B?

    • The reverse stand-off voltage is 171V.

  8. What is the peak pulse current rating of P6SMB200A-E3/5B?

    • The peak pulse current rating is 5.8A.

  9. Is P6SMB200A-E3/5B RoHS compliant?

    • Yes, P6SMB200A-E3/5B is RoHS compliant.

  10. What are the key features of P6SMB200A-E3/5B?

    • Key features include low incremental surge resistance, excellent clamping capability, and fast response time.

I hope this information is helpful! Let me know if you need further assistance.