P6SMB39A-M3/52
Product Overview
Category
The P6SMB39A-M3/52 belongs to the category of transient voltage suppressor (TVS) diodes.
Use
It is used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.
Characteristics
- Fast response time
- Low clamping voltage
- High surge current capability
- RoHS compliant
Package
The P6SMB39A-M3/52 is available in a DO-214AA (SMB) package.
Essence
The essence of this product lies in its ability to divert excessive current away from sensitive components, thereby safeguarding them from damage.
Packaging/Quantity
The P6SMB39A-M3/52 is typically packaged in reels with a quantity of 3000 units per reel.
Specifications
- Standoff Voltage: 33.3V
- Breakdown Voltage: 36.7V
- Maximum Clamping Voltage: 59.3V
- Peak Pulse Current: 67.4A
- Operating Temperature Range: -55°C to +150°C
Detailed Pin Configuration
The P6SMB39A-M3/52 has two pins: 1. Anode 2. Cathode
Functional Features
- Bi-directional TVS diode
- Low incremental surge resistance
- High temperature stability
Advantages and Disadvantages
Advantages
- Provides robust protection against voltage transients
- Fast response time ensures minimal impact on the protected circuit
- High surge current capability enhances reliability
Disadvantages
- May exhibit leakage current at lower voltages
- Sensitive to reverse bias conditions if not properly installed
Working Principles
When a voltage transient occurs, the P6SMB39A-M3/52 conducts excess current to ground, limiting the voltage across the protected circuit.
Detailed Application Field Plans
The P6SMB39A-M3/52 is commonly used in the following applications: - Telecommunication equipment - Automotive electronics - Industrial control systems - Power supplies
Detailed and Complete Alternative Models
Some alternative models to the P6SMB39A-M3/52 include: - P6SMB10A-M3/52 - P6SMB15A-M3/52 - P6SMB24A-M3/52
In conclusion, the P6SMB39A-M3/52 transient voltage suppressor diode offers reliable protection against voltage transients and finds widespread use in various electronic applications.
Word count: 366
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi P6SMB39A-M3/52 dalam penyelesaian teknikal
What is the maximum peak pulse power of P6SMB39A-M3/52?
- The maximum peak pulse power of P6SMB39A-M3/52 is 600W.
What is the breakdown voltage of P6SMB39A-M3/52?
- The breakdown voltage of P6SMB39A-M3/52 is 43.6V.
What is the operating temperature range for P6SMB39A-M3/52?
- P6SMB39A-M3/52 has an operating temperature range of -55°C to +150°C.
What are the typical applications for P6SMB39A-M3/52?
- P6SMB39A-M3/52 is commonly used in surge protection for sensitive electronics, such as in telecommunications equipment, industrial control systems, and automotive electronics.
Does P6SMB39A-M3/52 provide bidirectional protection?
- Yes, P6SMB39A-M3/52 offers bidirectional protection, making it suitable for applications where protection from both positive and negative transient voltage spikes is required.
What is the response time of P6SMB39A-M3/52?
- P6SMB39A-M3/52 has a very fast response time, typically less than 1 nanosecond.
Is P6SMB39A-M3/52 RoHS compliant?
- Yes, P6SMB39A-M3/52 is RoHS compliant, ensuring that it meets environmental standards for hazardous substances.
What is the package type of P6SMB39A-M3/52?
- P6SMB39A-M3/52 comes in a DO-214AA (SMB) package.
Can P6SMB39A-M3/52 be used for overvoltage protection in power supply circuits?
- Yes, P6SMB39A-M3/52 is suitable for providing overvoltage protection in power supply circuits to safeguard against voltage transients.
What is the clamping voltage of P6SMB39A-M3/52?
- The clamping voltage of P6SMB39A-M3/52 is 64.1V at a peak pulse current of 10A, providing effective protection against transient voltage spikes.