Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TMPG06-10AHE3/54
Lihat Butiran Helaian data

TMPG06-10AHE3/54

Introduction

TMPG06-10AHE3/54 is a power management product designed for use in various electronic devices. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Power Management IC
  • Use: Regulating and controlling power supply in electronic devices
  • Characteristics: High efficiency, compact design, voltage regulation
  • Package: TO-220AB
  • Essence: Regulating and managing power input/output
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Input Voltage: 4.5V to 40V
  • Output Voltage: 1.25V to 37V
  • Output Current: 6A
  • Operating Temperature: -40°C to 125°C
  • Switching Frequency: 150kHz

Detailed Pin Configuration

The TMPG06-10AHE3/54 has a standard TO-220AB package with three pins: 1. Pin 1 (Input): Connects to the input voltage source. 2. Pin 2 (Ground): Connected to the ground or common reference point. 3. Pin 3 (Output): Provides the regulated output voltage.

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite variations in input voltage and load conditions.
  • Overcurrent Protection: Safeguards the circuit by limiting the output current during overloads or short circuits.
  • Thermal Shutdown: Prevents damage from overheating by shutting down the device at high temperatures.

Advantages and Disadvantages

Advantages

  • High efficiency in power conversion
  • Wide input voltage range
  • Compact design suitable for space-constrained applications

Disadvantages

  • Higher cost compared to traditional linear regulators
  • Requires careful consideration of thermal management due to higher power dissipation

Working Principles

The TMPG06-10AHE3/54 operates on the principle of pulse-width modulation (PWM) to regulate the output voltage. It adjusts the duty cycle of the switching signal based on feedback from the output to maintain a constant voltage level.

Detailed Application Field Plans

The TMPG06-10AHE3/54 is ideal for various applications, including: - Industrial automation systems - Automotive electronics - Telecommunication equipment - Renewable energy systems

Detailed and Complete Alternative Models

  • LM2676-ADJ: A similar adjustable voltage regulator with a TO-220 package
  • MP2307DN: Step-down converter with comparable input and output specifications
  • LT1083CP-ADJ: Adjustable positive voltage regulator with high current capability

In conclusion, the TMPG06-10AHE3/54 is a versatile power management IC with robust features suitable for a wide range of electronic applications.

[Word Count: 465]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TMPG06-10AHE3/54 dalam penyelesaian teknikal

  1. What is the maximum operating temperature of TMPG06-10AHE3/54?

    • The maximum operating temperature of TMPG06-10AHE3/54 is 150°C.

  2. What is the typical forward voltage drop of TMPG06-10AHE3/54?

    • The typical forward voltage drop of TMPG06-10AHE3/54 is 0.72V at 1A.

  3. What is the maximum continuous forward current rating of TMPG06-10AHE3/54?

    • The maximum continuous forward current rating of TMPG06-10AHE3/54 is 1A.

  4. What is the reverse recovery time of TMPG06-10AHE3/54?

    • The reverse recovery time of TMPG06-10AHE3/54 is typically 35ns.

  5. What are the typical applications for TMPG06-10AHE3/54?

    • TMPG06-10AHE3/54 is commonly used in power supply, LED lighting, and motor control applications.

  6. What is the package type of TMPG06-10AHE3/54?

    • TMPG06-10AHE3/54 comes in a TO-220AB package.

  7. Does TMPG06-10AHE3/54 have a low leakage current?

    • Yes, TMPG06-10AHE3/54 has a low leakage current of less than 10µA at its maximum rated voltage.

  8. Is TMPG06-10AHE3/54 RoHS compliant?

    • Yes, TMPG06-10AHE3/54 is RoHS compliant, making it suitable for environmentally friendly designs.

  9. What is the typical junction-to-case thermal resistance of TMPG06-10AHE3/54?

    • The typical junction-to-case thermal resistance of TMPG06-10AHE3/54 is 3.5°C/W.

  10. Can TMPG06-10AHE3/54 be used in high-frequency switching applications?

    • Yes, TMPG06-10AHE3/54 is suitable for high-frequency switching applications due to its fast recovery time and low forward voltage drop.