Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TPSMC39A001HE3_A/I
Lihat Butiran Helaian data

TPSMC39A001HE3_A/I

Introduction

The TPSMC39A001HE3A/I is a semiconductor product belonging to the category of transient voltage suppressor diodes. This entry provides an overview of the basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models of the TPSMC39A001HE3A/I.

Basic Information Overview

  • Category: Transient Voltage Suppressor Diodes
  • Use: Protection against voltage transients in electronic circuits
  • Characteristics: Fast response time, low clamping voltage, high surge current capability
  • Package: SMA (DO-214AC)
  • Essence: Provides protection for sensitive electronic components from voltage spikes
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Peak Pulse Power: 400 W
  • Breakdown Voltage Range: 6.4 V to 220 V
  • Operating Temperature Range: -55°C to +150°C
  • RoHS Compliant: Yes

Detailed Pin Configuration

The TPSMC39A001HE3_A/I follows the standard SMA (DO-214AC) package configuration with two leads.

Functional Features

  • Transient Voltage Suppression: Protects sensitive electronic components from voltage spikes.
  • Fast Response Time: Quickly clamps transient voltages to safe levels.
  • Low Clamping Voltage: Ensures minimal stress on protected circuits during transient events.

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • RoHS compliant

Disadvantages

  • Limited breakdown voltage range compared to some alternative models
  • Relatively lower surge current capability

Working Principles

The TPSMC39A001HE3_A/I operates by diverting excessive voltage transients away from sensitive electronic components, thereby safeguarding them from potential damage. When a transient voltage exceeds the breakdown voltage, the diode conducts, shunting the excess energy to ground and limiting the voltage across the protected circuit.

Detailed Application Field Plans

The TPSMC39A001HE3_A/I is widely used in various applications, including: - Power supplies - Communication systems - Automotive electronics - Industrial equipment - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to the TPSMC39A001HE3_A/I include: - P6SMBJ6.5CA - 1.5KE6.8A - SMBJ6.0A

In summary, the TPSMC39A001HE3_A/I is a transient voltage suppressor diode that offers effective protection against voltage transients in electronic circuits. With its fast response time and low clamping voltage, it is suitable for a wide range of applications. However, users should consider the limited breakdown voltage range and surge current capability when selecting this diode for specific applications.

Word count: 411

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TPSMC39A001HE3_A/I dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of TPSMC39A001HE3_A/I in technical solutions:

  1. What is the TPSMC39A001HE3_A/I?

    • The TPSMC39A001HE3_A/I is a transient voltage suppressor diode designed to protect sensitive electronics from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

  2. What is the maximum peak pulse power of TPSMC39A001HE3_A/I?

    • The maximum peak pulse power is 400W for an 8/20μs waveform.

  3. What is the breakdown voltage of TPSMC39A001HE3_A/I?

    • The breakdown voltage is 33V.

  4. What is the operating temperature range of TPSMC39A001HE3_A/I?

    • The operating temperature range is -55°C to +150°C.

  5. How is TPSMC39A001HE3_A/I typically used in technical solutions?

    • TPSMC39A001HE3_A/I is commonly used in surge protection applications for power supplies, communication systems, industrial equipment, and automotive electronics.

  6. What is the reverse stand-off voltage of TPSMC39A001HE3_A/I?

    • The reverse stand-off voltage is 30V.

  7. Does TPSMC39A001HE3_A/I meet industry standards for surge protection?

    • Yes, TPSMC39A001HE3_A/I meets industry standards such as IEC 61000-4-5 for surge protection.

  8. Can TPSMC39A001HE3_A/I be used in high-speed data line protection?

    • Yes, TPSMC39A001HE3_A/I is suitable for protecting high-speed data lines such as USB, Ethernet, and HDMI interfaces.

  9. What package type does TPSMC39A001HE3_A/I come in?

    • TPSMC39A001HE3_A/I is available in a DO-214AB (SMC) package.

  10. Are there any recommended layout considerations when using TPSMC39A001HE3_A/I?

    • It is recommended to minimize the length of the traces between the protected component and the TPSMC39A001HE3_A/I to reduce inductance and optimize performance.

I hope these answers provide the information you were looking for! If you have any more questions, feel free to ask.