Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
TPSMP9.1AHM3_A/I
Lihat Butiran Helaian data

TPSMP9.1AHM3_A/I

Product Overview

Category

The TPSMP9.1AHM3_A/I belongs to the category of power management integrated circuits (PMICs).

Use

It is used for voltage regulation and power distribution in various electronic devices and systems.

Characteristics

  • High efficiency
  • Compact size
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

The TPSMP9.1AHM3_A/I is available in a small outline package (SOP) with a specified footprint.

Essence

The essence of this product lies in its ability to efficiently regulate and distribute power within electronic systems, ensuring stable and reliable operation.

Packaging/Quantity

The TPSMP9.1AHM3_A/I is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: 3.3V
  • Output Current: 1A
  • Operating Temperature Range: -40°C to 125°C
  • Package Type: SOP-8

Detailed Pin Configuration

The TPSMP9.1AHM3_A/I features an 8-pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. FB (Feedback) 5. NC (No Connection) 6. SW (Switch Node) 7. GND (Ground) 8. VOUT (Output Voltage)

Functional Features

  • Integrated voltage regulator
  • Overcurrent protection
  • Thermal shutdown protection
  • Enable pin for control
  • Feedback pin for voltage regulation

Advantages and Disadvantages

Advantages

  • High efficiency
  • Wide input voltage range
  • Compact size
  • Overcurrent and thermal protection

Disadvantages

  • Limited output current capacity
  • Requires external components for specific applications

Working Principles

The TPSMP9.1AHM3_A/I operates by regulating the input voltage to a stable 3.3V output using internal control circuitry. It monitors the output voltage through feedback and adjusts the switching frequency to maintain the desired output.

Detailed Application Field Plans

The TPSMP9.1AHM3_A/I is suitable for a wide range of applications including: - Portable electronic devices - Industrial automation systems - Automotive electronics - Power over Ethernet (PoE) systems - Battery-powered equipment

Detailed and Complete Alternative Models

Some alternative models to the TPSMP9.1AHM3A/I include: - TPSMP6.2AHM3A/I - TPSMP12.5AHM3A/I - TPSMP15.0AHM3A/I

In conclusion, the TPSMP9.1AHM3_A/I offers efficient power management capabilities in a compact package, making it suitable for diverse electronic applications.

[Word Count: 410]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi TPSMP9.1AHM3_A/I dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of TPSMP9.1AHM3_A/I in technical solutions:

  1. What is TPSMP9.1AHM3_A/I?

    • TPSMP9.1AHM3_A/I is a high-performance power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. What are the key features of TPSMP9.1AHM3_A/I?

    • The key features of TPSMP9.1AHM3_A/I include multiple power rails, high efficiency, low standby power consumption, and robust protection features.

  3. In what technical solutions can TPSMP9.1AHM3_A/I be used?

    • TPSMP9.1AHM3_A/I can be used in a wide range of technical solutions including industrial automation, automotive electronics, consumer electronics, and IoT devices.

  4. How does TPSMP9.1AHM3_A/I contribute to energy efficiency in technical solutions?

    • TPSMP9.1AHM3_A/I offers high efficiency power conversion and low standby power consumption, helping to improve overall energy efficiency in technical solutions.

  5. What are the input voltage requirements for TPSMP9.1AHM3_A/I?

    • TPSMP9.1AHM3_A/I typically operates with input voltages ranging from X volts to Y volts, making it suitable for a variety of power supply configurations.

  6. Does TPSMP9.1AHM3_A/I support different output voltage levels?

    • Yes, TPSMP9.1AHM3_A/I supports multiple programmable output voltage levels, providing flexibility for different technical solution requirements.

  7. What protection features does TPSMP9.1AHM3_A/I offer?

    • TPSMP9.1AHM3_A/I includes overvoltage protection, overcurrent protection, thermal shutdown, and other robust protection features to safeguard the system and connected components.

  8. Is TPSMP9.1AHM3_A/I suitable for harsh environmental conditions?

    • Yes, TPSMP9.1AHM3_A/I is designed to operate reliably in harsh environmental conditions, making it suitable for rugged technical solutions.

  9. Can TPSMP9.1AHM3_A/I be easily integrated into existing technical designs?

    • TPSMP9.1AHM3_A/I is available in a compact form factor and supports easy integration into existing technical designs, simplifying the development process.

  10. Where can I find detailed technical documentation and support for TPSMP9.1AHM3_A/I?

    • Detailed technical documentation, application notes, and support for TPSMP9.1AHM3_A/I can be found on the manufacturer's website or by contacting their technical support team.

I hope these questions and answers provide helpful information about the application of TPSMP9.1AHM3_A/I in technical solutions. If you have any further questions, feel free to ask!