Vishay Semiconductor Diodes Division
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
VLZ3V6B-GS08
Lihat Butiran Helaian data

VLZ3V6B-GS08

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy
Package: SOT-23
Essence: Regulates voltage with low dropout and high accuracy
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV at 150mA
  • Accuracy: ±2%
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • High accuracy over line and load variations
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit

Advantages

  • Wide input voltage range
  • Small package size
  • Low dropout voltage
  • Excellent line and load regulation
  • Low power consumption

Disadvantages

  • Limited output current capability
  • Higher cost compared to traditional linear regulators

Working Principles

The VLZ3V6B-GS08 is a low dropout voltage regulator that maintains a stable output voltage even when the input voltage is only slightly higher than the desired output voltage. It achieves this by utilizing a PNP pass transistor in conjunction with a control circuit to regulate the output voltage.

Detailed Application Field Plans

The VLZ3V6B-GS08 is suitable for various battery-powered applications where a stable voltage supply is required, such as portable electronics, IoT devices, and battery-powered sensors. Its low dropout voltage and low quiescent current make it ideal for extending battery life in these applications.

Detailed and Complete Alternative Models

  1. LM1117-3.3
  2. MCP1702-3302E/TO

This content provides a comprehensive overview of the VLZ3V6B-GS08, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi VLZ3V6B-GS08 dalam penyelesaian teknikal

  1. What is the VLZ3V6B-GS08?

    • The VLZ3V6B-GS08 is a voltage regulator designed for use in technical solutions to provide stable and regulated power supply.

  2. What is the input voltage range of VLZ3V6B-GS08?

    • The input voltage range of VLZ3V6B-GS08 is typically between 4.5V and 28V.

  3. What is the output voltage of VLZ3V6B-GS08?

    • The output voltage of VLZ3V6B-GS08 is fixed at 3.6V.

  4. What is the maximum output current of VLZ3V6B-GS08?

    • The maximum output current of VLZ3V6B-GS08 is typically around 150mA.

  5. What are the typical applications of VLZ3V6B-GS08?

    • VLZ3V6B-GS08 is commonly used in battery-powered devices, portable equipment, and other applications requiring a stable 3.6V power supply.

  6. Does VLZ3V6B-GS08 require external components for operation?

    • Yes, VLZ3V6B-GS08 requires a few external components such as capacitors and resistors for proper operation.

  7. Is VLZ3V6B-GS08 suitable for automotive applications?

    • Yes, VLZ3V6B-GS08 is suitable for automotive applications due to its wide input voltage range and robust design.

  8. What are the key features of VLZ3V6B-GS08?

    • The key features of VLZ3V6B-GS08 include overcurrent protection, thermal shutdown, and low dropout voltage.

  9. Can VLZ3V6B-GS08 be used in industrial control systems?

    • Yes, VLZ3V6B-GS08 can be used in industrial control systems where a stable 3.6V power supply is required.

  10. Is VLZ3V6B-GS08 available in different package types?

    • Yes, VLZ3V6B-GS08 is available in various package types including SOT-23 and SC-70 for flexibility in different design layouts.