VS-MBR2045CT-N3
Product Overview
Category
The VS-MBR2045CT-N3 belongs to the category of Schottky Barrier Rectifiers.
Use
It is commonly used in power supply applications, voltage clamping, and reverse polarity protection.
Characteristics
- High current capability
- Low forward voltage drop
- Fast switching speed
- High temperature operation
Package
The VS-MBR2045CT-N3 is typically available in a TO-220AB package.
Essence
This product is essential for efficient power management and rectification in electronic circuits.
Packaging/Quantity
It is usually packaged in reels or tubes and is available in varying quantities depending on the supplier.
Specifications
- Maximum Average Forward Current: 20A
- Peak Forward Surge Current: 200A
- Reverse Voltage: 45V
- Operating Temperature Range: -65°C to +175°C
- Forward Voltage Drop: 0.55V at 10A
Detailed Pin Configuration
The VS-MBR2045CT-N3 has three pins: 1. Anode 2. Cathode 3. Gate (for some models)
Functional Features
- Low power loss
- High efficiency
- High surge current capability
- Excellent high-temperature stability
Advantages
- Fast switching speed
- Low forward voltage drop
- Suitable for high-frequency applications
- Enhanced thermal performance
Disadvantages
- Sensitive to voltage spikes
- Higher cost compared to standard rectifiers
- Limited reverse voltage rating
Working Principles
The VS-MBR2045CT-N3 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional diodes.
Detailed Application Field Plans
This rectifier is widely used in: - Switching power supplies - DC-DC converters - Solar panel bypass diodes - Automotive electronics
Detailed and Complete Alternative Models
Some alternative models to the VS-MBR2045CT-N3 include: - SS24 - SR2045 - SB540
In conclusion, the VS-MBR2045CT-N3 Schottky Barrier Rectifier offers high efficiency and fast switching speed, making it suitable for various power supply and voltage clamping applications. Its characteristics, specifications, and application field plans make it an essential component in modern electronic circuits.
[Word Count: 330]
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi VS-MBR2045CT-N3 dalam penyelesaian teknikal
What is the maximum voltage rating of the VS-MBR2045CT-N3?
- The maximum voltage rating of the VS-MBR2045CT-N3 is 45 volts.
What is the maximum current rating of the VS-MBR2045CT-N3?
- The maximum current rating of the VS-MBR2045CT-N3 is 20 amperes.
What is the forward voltage drop of the VS-MBR2045CT-N3 at a specific current?
- The forward voltage drop of the VS-MBR2045CT-N3 varies with current, typically around 0.55 volts at 10 amperes.
What is the reverse recovery time of the VS-MBR2045CT-N3?
- The reverse recovery time of the VS-MBR2045CT-N3 is typically around 35 nanoseconds.
Can the VS-MBR2045CT-N3 be used in parallel to handle higher currents?
- Yes, the VS-MBR2045CT-N3 can be used in parallel to increase the current-handling capability in technical solutions.
What are the typical applications for the VS-MBR2045CT-N3?
- The VS-MBR2045CT-N3 is commonly used in power supplies, motor drives, and other high-frequency rectification applications.
Does the VS-MBR2045CT-N3 require a heatsink for proper operation?
- It is recommended to use a heatsink when operating the VS-MBR2045CT-N3 at high currents or in elevated temperature environments.
What is the junction temperature range for the VS-MBR2045CT-N3?
- The junction temperature range for the VS-MBR2045CT-N3 is -55°C to +150°C.
Is the VS-MBR2045CT-N3 RoHS compliant?
- Yes, the VS-MBR2045CT-N3 is RoHS compliant, making it suitable for environmentally conscious designs.
Are there any known reliability issues or failure modes associated with the VS-MBR2045CT-N3?
- The VS-MBR2045CT-N3 is known for its reliability, but care should be taken to avoid exceeding its maximum ratings and operating conditions to prevent potential failure modes.