SI4904DY-T1-E3
Product Overview
- Category: Integrated Circuit
- Use: Power Management
- Characteristics: High efficiency, low power consumption
- Package: SOIC-8
- Essence: Voltage Regulator
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Input Voltage: 2.5V to 6.5V
- Output Voltage: 0.8V to 5.5V
- Output Current: 3A
- Switching Frequency: 1.2MHz
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- VIN (Pin 1)
- GND (Pin 2)
- FB (Pin 3)
- EN (Pin 4)
- SW (Pin 5)
- PGND (Pin 6)
- SS/TRK (Pin 7)
- VOUT (Pin 8)
Functional Features
- Integrated high-side and low-side MOSFETs
- Adjustable output voltage
- Overcurrent protection
- Thermal shutdown protection
- Soft-start capability
Advantages and Disadvantages
Advantages: - High efficiency - Wide input voltage range - Compact package size
Disadvantages: - Limited output current compared to some alternatives - Higher cost compared to linear regulators
Working Principles
The SI4904DY-T1-E3 is a synchronous buck regulator that efficiently converts a higher input voltage to a lower output voltage. It uses pulse-width modulation (PWM) to control the output voltage and maintain regulation under varying load conditions.
Detailed Application Field Plans
This product is well-suited for various applications including: - Portable electronic devices - Battery-powered systems - Industrial automation equipment - LED lighting
Detailed and Complete Alternative Models
- LM2675-ADJ/NOPB
- LT1763-3.3
- TPS54331DGQR
In conclusion, the SI4904DY-T1-E3 is a versatile and efficient voltage regulator suitable for a wide range of applications, offering high performance and reliability in a compact package.
Word count: 278
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SI4904DY-T1-E3 dalam penyelesaian teknikal
What is the typical application of SI4904DY-T1-E3?
- The SI4904DY-T1-E3 is commonly used in power management and load switch applications.
What is the maximum voltage rating for SI4904DY-T1-E3?
- The maximum voltage rating for SI4904DY-T1-E3 is typically around 20V.
What is the maximum current rating for SI4904DY-T1-E3?
- The maximum continuous current rating for SI4904DY-T1-E3 is typically around 4A.
What are the key features of SI4904DY-T1-E3?
- Some key features of SI4904DY-T1-E3 include low on-resistance, low threshold voltage, and overcurrent protection.
What are the recommended operating conditions for SI4904DY-T1-E3?
- The recommended operating conditions for SI4904DY-T1-E3 include a specified input voltage range and ambient temperature range.
Is SI4904DY-T1-E3 suitable for battery-powered applications?
- Yes, SI4904DY-T1-E3 is suitable for battery-powered applications due to its low on-resistance and efficient power management capabilities.
Does SI4904DY-T1-E3 require any external components for operation?
- SI4904DY-T1-E3 may require external components such as decoupling capacitors and resistors for proper operation in certain applications.
What are the typical thermal considerations for SI4904DY-T1-E3?
- Thermal considerations for SI4904DY-T1-E3 include proper heat sinking and thermal management to ensure optimal performance and reliability.
Can SI4904DY-T1-E3 be used in automotive applications?
- Yes, SI4904DY-T1-E3 can be used in automotive applications, provided it meets the necessary automotive standards and requirements.
Are there any specific layout guidelines for using SI4904DY-T1-E3 in PCB designs?
- Yes, specific layout guidelines such as minimizing trace lengths and proper grounding should be followed for optimal performance when using SI4904DY-T1-E3 in PCB designs.