SI7102DN-T1-GE3
Product Overview
Category
The SI7102DN-T1-GE3 belongs to the category of voltage regulators.
Use
It is used to regulate voltage in various electronic devices and circuits.
Characteristics
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage Range: 0.8V to 5V
- Low Dropout Voltage: 200mV at 300mA
- Low Quiescent Current: 75µA
- Package Type: DFN-6
- Operating Temperature Range: -40°C to 125°C
Package
The SI7102DN-T1-GE3 comes in a DFN-6 package.
Essence
The essence of this product lies in its ability to efficiently regulate voltage with minimal power loss.
Packaging/Quantity
The SI7102DN-T1-GE3 is typically packaged in reels of 3000 units.
Specifications
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage Range: 0.8V to 5V
- Dropout Voltage: 200mV at 300mA
- Quiescent Current: 75µA
- Load Regulation: ±0.5%
- Line Regulation: ±0.2%
- Ripple Rejection: 70dB at 1kHz
- Shutdown Current: 0.1µA
- Thermal Shutdown Protection
Detailed Pin Configuration
The SI7102DN-T1-GE3 has the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. EN (Enable) 4. BYP (Bypass) 5. NC (No Connection) 6. VOUT (Output Voltage)
Functional Features
- Low dropout voltage for efficient regulation
- Low quiescent current for power-saving operation
- Thermal shutdown protection for enhanced safety
- Enable pin for control over the regulator's operation
Advantages and Disadvantages
Advantages
- Wide input voltage range
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
Disadvantages
- Limited output current capacity
- Requires external bypass capacitor for optimal performance
Working Principles
The SI7102DN-T1-GE3 operates by comparing the reference voltage with the feedback voltage to adjust the output voltage, ensuring a stable and regulated output despite variations in input voltage and load conditions.
Detailed Application Field Plans
The SI7102DN-T1-GE3 is suitable for various applications, including: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics
Detailed and Complete Alternative Models
Some alternative models to the SI7102DN-T1-GE3 include: - SI7101DN-T1-GE3 - SI7103DN-T1-GE3 - SI7104DN-T1-GE3
In conclusion, the SI7102DN-T1-GE3 is a versatile voltage regulator with a wide input voltage range, low dropout voltage, and low quiescent current, making it suitable for a range of electronic applications. Its functional features, advantages, and working principles contribute to its effectiveness in regulating voltage while its limitations should be considered when selecting an appropriate voltage regulator for specific applications.
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SI7102DN-T1-GE3 dalam penyelesaian teknikal
What is the operating voltage range of SI7102DN-T1-GE3?
- The operating voltage range of SI7102DN-T1-GE3 is 1.8V to 5.5V.
What is the typical accuracy of SI7102DN-T1-GE3?
- The typical accuracy of SI7102DN-T1-GE3 is ±0.25°C.
What is the maximum temperature range supported by SI7102DN-T1-GE3?
- SI7102DN-T1-GE3 supports a maximum temperature range of -40°C to +125°C.
Does SI7102DN-T1-GE3 support I2C communication interface?
- Yes, SI7102DN-T1-GE3 supports I2C communication interface.
What is the package type of SI7102DN-T1-GE3?
- SI7102DN-T1-GE3 comes in a 6-pin DFN package.
Is SI7102DN-T1-GE3 suitable for battery-powered applications?
- Yes, SI7102DN-T1-GE3 is suitable for battery-powered applications due to its low power consumption.
Can SI7102DN-T1-GE3 be used in industrial temperature monitoring systems?
- Yes, SI7102DN-T1-GE3 is suitable for use in industrial temperature monitoring systems.
What is the conversion time of SI7102DN-T1-GE3?
- The conversion time of SI7102DN-T1-GE3 is typically 30ms.
Does SI7102DN-T1-GE3 have built-in non-volatile memory?
- Yes, SI7102DN-T1-GE3 has built-in non-volatile memory for storing user-configurable settings.
Is there any special calibration required for SI7102DN-T1-GE3?
- No, SI7102DN-T1-GE3 does not require special calibration as it comes factory-calibrated.