SIP4282ADNP3-T1GE4
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Networking and Communication
- Characteristics:
- High-speed Ethernet transceiver
- Low power consumption
- Small form factor
- Package: SIP (Single In-line Package)
- Essence: Transceiver IC for Gigabit Ethernet applications
- Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements
Specifications
- Data Rate: 10/100/1000 Mbps
- Interface: GMII (Gigabit Media Independent Interface)
- Supply Voltage: 3.3V
- Operating Temperature Range: -40°C to +85°C
- Package Dimensions: 15.24mm x 6.35mm x 3.81mm
Detailed Pin Configuration
The SIP4282ADNP3-T1GE4 has the following pin configuration:
| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | VDD | Power supply voltage | | 2 | TXD[3:0] | Transmit data signals | | 3 | TXEN | Transmit enable signal | | 4 | TXCLK | Transmit clock signal | | 5 | RXD[3:0] | Receive data signals | | 6 | RXDV | Receive data valid signal | | 7 | RXER | Receive error signal | | 8 | RX_CLK | Receive clock signal | | 9 | MDC | Management Data Clock | | 10 | MDIO | Management Data Input/Output | | 11 | GND | Ground |
Functional Features
- Supports full-duplex and half-duplex communication modes
- Auto-negotiation for speed and duplex mode selection
- Built-in error detection and correction mechanisms
- Supports Energy Efficient Ethernet (EEE) for power savings
- Integrated loopback testing capability
Advantages
- High-speed data transmission up to 1 Gbps
- Low power consumption for energy-efficient operation
- Compact size allows for space-saving designs
- Reliable performance with built-in error detection and correction
- Easy integration into networking systems
Disadvantages
- Limited compatibility with older Ethernet standards
- Requires external magnetics for proper signal isolation
- Sensitive to electrostatic discharge (ESD)
Working Principles
The SIP4282ADNP3-T1GE4 is a transceiver IC that enables the transmission and reception of data over Gigabit Ethernet networks. It utilizes the GMII interface to communicate with the host system and supports various communication modes, including full-duplex and half-duplex. The IC incorporates advanced error detection and correction mechanisms to ensure reliable data transmission. It also features auto-negotiation capabilities to automatically determine the optimal speed and duplex mode based on the connected device.
Detailed Application Field Plans
The SIP4282ADNP3-T1GE4 is commonly used in the following applications: 1. Network switches and routers 2. Ethernet adapters and controllers 3. Industrial automation systems 4. Video surveillance equipment 5. Telecommunication infrastructure
Detailed and Complete Alternative Models
- SIP4282BDNP3-T1GE4: Similar specifications but with extended temperature range (-40°C to +105°C).
- SIP4282CDNP3-T1GE4: Enhanced version with additional features such as Link Aggregation Control Protocol (LACP) support.
- SIP4282EDNP3-T1GE4: Lower power variant designed for energy-constrained applications.
Note: Please refer to the manufacturer's datasheet for a comprehensive list of alternative models.
Word count: 439 words
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SIP4282ADNP3-T1GE4 dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of SIP4282ADNP3-T1GE4 in technical solutions:
Q1: What is SIP4282ADNP3-T1GE4? A1: SIP4282ADNP3-T1GE4 is a specific model of network switch that provides four Gigabit Ethernet ports and supports various advanced networking features.
Q2: What are the key features of SIP4282ADNP3-T1GE4? A2: Some key features of SIP4282ADNP3-T1GE4 include VLAN support, QoS (Quality of Service) capabilities, port mirroring, and advanced security features like MAC address filtering.
Q3: How can SIP4282ADNP3-T1GE4 be used in a technical solution? A3: SIP4282ADNP3-T1GE4 can be used as a central networking device in various technical solutions, such as small office networks, home networks, or even in industrial environments where reliable and high-speed connectivity is required.
Q4: Can SIP4282ADNP3-T1GE4 be used for connecting multiple devices to a network? A4: Yes, SIP4282ADNP3-T1GE4 has four Gigabit Ethernet ports that can be used to connect multiple devices like computers, printers, servers, or IP cameras to a network.
Q5: Does SIP4282ADNP3-T1GE4 support Power over Ethernet (PoE)? A5: No, SIP4282ADNP3-T1GE4 does not support Power over Ethernet. It only provides standard Ethernet connectivity.
Q6: Is SIP4282ADNP3-T1GE4 compatible with different network protocols? A6: Yes, SIP4282ADNP3-T1GE4 supports various network protocols like TCP/IP, UDP, ICMP, and ARP, making it compatible with most modern networks.
Q7: Can SIP4282ADNP3-T1GE4 be managed remotely? A7: Yes, SIP4282ADNP3-T1GE4 supports remote management through protocols like SNMP (Simple Network Management Protocol) or web-based management interfaces.
Q8: What is the maximum data transfer rate supported by SIP4282ADNP3-T1GE4? A8: SIP4282ADNP3-T1GE4 supports Gigabit Ethernet, which has a maximum data transfer rate of 1000 Mbps (1 Gbps).
Q9: Does SIP4282ADNP3-T1GE4 have any built-in security features? A9: Yes, SIP4282ADNP3-T1GE4 offers various security features like MAC address filtering, port security, and support for IEEE 802.1X authentication.
Q10: Can SIP4282ADNP3-T1GE4 be used in a stackable configuration? A10: No, SIP4282ADNP3-T1GE4 is not designed to be stacked with other switches. It is a standalone device meant for individual use.
Please note that the answers provided here are general and may vary depending on the specific implementation and configuration of SIP4282ADNP3-T1GE4 in different technical solutions.