Vishay Siliconix
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SQM40N15-38_GE3
Lihat Butiran Helaian data

SQM40N15-38_GE3

Product Overview

Category

The SQM40N15-38_GE3 belongs to the category of power MOSFETs.

Use

It is used as a high-power switching device in various electronic circuits and applications.

Characteristics

  • High voltage and current handling capabilities
  • Low on-state resistance
  • Fast switching speed
  • Low gate drive power requirements

Package

The SQM40N15-38_GE3 is typically available in a TO-247 package.

Essence

This MOSFET is essential for efficient power management and control in electronic systems.

Packaging/Quantity

It is commonly packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

  • Voltage Rating: 1500V
  • Current Rating: 40A
  • On-State Resistance: 38mΩ
  • Package Type: TO-247

Detailed Pin Configuration

The SQM40N15-38_GE3 has a standard pin configuration with three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High voltage and current handling capacity
  • Low conduction losses
  • Fast switching speed
  • Suitable for high-frequency applications

Advantages

  • Efficient power management
  • Reduced heat dissipation
  • Enhanced system reliability
  • Suitable for high-power applications

Disadvantages

  • Higher cost compared to lower-rated MOSFETs
  • Requires careful consideration of driving circuitry due to high voltage ratings

Working Principles

The SQM40N15-38_GE3 operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When the gate-source voltage is applied, it creates an electric field that modulates the conductivity of the channel, allowing for efficient power switching.

Detailed Application Field Plans

The SQM40N15-38_GE3 is widely used in the following application fields: - Power supplies - Motor drives - Renewable energy systems - Industrial automation - Electric vehicles

Detailed and Complete Alternative Models

Some alternative models to the SQM40N15-38_GE3 include: - IRFP4668PbF - IXFN38N100Q2

In conclusion, the SQM40N15-38_GE3 power MOSFET offers high-performance characteristics suitable for demanding power management applications across various industries.

[Word Count: 308]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SQM40N15-38_GE3 dalam penyelesaian teknikal

  1. What is the maximum voltage rating of SQM40N15-38_GE3?

    • The maximum voltage rating of SQM40N15-38_GE3 is 1500V.

  2. What is the continuous drain current of SQM40N15-38_GE3?

    • The continuous drain current of SQM40N15-38_GE3 is 40A.

  3. What is the on-resistance of SQM40N15-38_GE3?

    • The on-resistance of SQM40N15-38_GE3 is typically 15mΩ.

  4. Can SQM40N15-38_GE3 be used in automotive applications?

    • Yes, SQM40N15-38_GE3 is suitable for automotive applications.

  5. What is the operating temperature range of SQM40N15-38_GE3?

    • The operating temperature range of SQM40N15-38_GE3 is -55°C to 175°C.

  6. Is SQM40N15-38_GE3 RoHS compliant?

    • Yes, SQM40N15-38_GE3 is RoHS compliant.

  7. Does SQM40N15-38_GE3 require a heat sink for proper operation?

    • It is recommended to use a heat sink for optimal performance of SQM40N15-38_GE3, especially in high-power applications.

  8. What are the typical applications of SQM40N15-38_GE3?

    • Typical applications of SQM40N15-38_GE3 include motor control, power supplies, and inverters.

  9. What is the gate threshold voltage of SQM40N15-38_GE3?

    • The gate threshold voltage of SQM40N15-38_GE3 is typically 2.5V.

  10. Is SQM40N15-38_GE3 suitable for use in high-frequency switching applications?

    • Yes, SQM40N15-38_GE3 is designed for high-frequency switching applications.